Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Multiple tumbler bowls?

Discussion in 'Handloading and Reloading' started by Pit4Brains, Jun 15, 2012.

Thread Status:
Not open for further replies.
  1. Pit4Brains

    Pit4Brains Member

    Joined:
    May 31, 2012
    Messages:
    225
    Location:
    Mesa, Az
    I have a fairly new Lyman twin. I have only used the large bowl up to now and it is filthy. I kinda had the thought of getting at least one more bowl to tumble clean, sized brass and loaded rounds while using my current dirty bowl and media for post-fired brass only.
    Does anyone with the twin use the tiny inner bowl?
    Does anyone have multiple bowls with different media that fit the same tumbler?
     
  2. jmorris

    jmorris Member

    Joined:
    Sep 30, 2005
    Messages:
    9,084
    The crud that sticks to the inside of the bowl it so tough I haven't seen it come off and stick to cases, loaded or not.

    The only thing I used the tiny lyman bowl for was moly coating bullets.
     
  3. dickttx

    dickttx Member

    Joined:
    Feb 9, 2011
    Messages:
    954
    Location:
    Fort Worth
    After seeing a posting on a forum, I have started spraying the inside of my tumbler bowl with Windex. I let it sit while I run my brass/media thru the separator, then wipe it with a paper towel. Clean as a whistle. Let it dry before putting the media back in. Don't wipe your face with, or chew on, the paper towel.:D
     
Thread Status:
Not open for further replies.

Share This Page