I have an RCBS .308 neck sizing die that I was using tonight and the piece that holds the part that decaps the primer came off and lodged into the case. I removed it from the case and screwed it back on but it came off again. I dont really use this die for decaping i use a Lee for decaping. My question is if I dont put the pin and the bulb piece it fits into does it affect my neck sizing. So what I will have is the die with the threaded male piece going into the case when i neck size. I tried a few and it does seem to neck size without this piece. Just need someone to qualify this. I find the Lee decaping die to be really durable so i just use it for decaping.
Thanks
Thanks