Voodoochile
Member
Okay, first off I'm only using the Lee Classic Loader for the 7.62X54R because it was a B-day present & that I haven't gotten around to get a full dies set yet but any way.
Been loading my Privi Brass with 49gr. H414 & 180gr. Speer .311 RNSP for a bit & noticed last night that on a few of my cases I load the projectile to level & check the loaded cartridge & can simply twist & push the projectile into the case, I'm not talking gorilla grip either..
These are once fired brass in my own rifle from my own loads, cleaned them with finger nail polish remover on the outside & ran them through the process as normal but I had 6 out of 20 rounds do this.
Thoughts?
Been loading my Privi Brass with 49gr. H414 & 180gr. Speer .311 RNSP for a bit & noticed last night that on a few of my cases I load the projectile to level & check the loaded cartridge & can simply twist & push the projectile into the case, I'm not talking gorilla grip either..
These are once fired brass in my own rifle from my own loads, cleaned them with finger nail polish remover on the outside & ran them through the process as normal but I had 6 out of 20 rounds do this.
Thoughts?