sammy
Member
I am having a bit of trouble with my Dillon 650. When adjusting the powder bar I will cycle the bar 10 times and then weigh the charge just to make sure it is accurate. When I finally get the correct charge weight (6.0 grains) I double check the charge by combining 10 charges and weighing again. Everything is set and I begin loading. After 50 or so rounds I weigh another charge.....6.2 and then I weigh 5 more. All the same. The powder bar is traveling it's full distance and I re-read the manual but can't find anything wrong. Dillon says that the deveation is acceptable, that .2 grains is not that far off. I am using Unique powder and have not tried anything else. HELP!!!!! Thanks, Sammy :banghead: