Need help with Ruger

[Geronimo-7]

I have a problem with a Ruger Super Blackhawk .44 mag. I've had it for about a year and every session I fire it the frame screws come loose. Is there a good compound to put on the threads to keep them secure? I don't want anything that will make it impossible to take apart later on.

 

[Tiny in Ohio]

Loctite Red will keep them from backing out, but probably will not come apart when needed. Try some Loctite Blue, it should work.

 

[Kruzr]

Blue loctite should hold it. Ruger used a white threadlocker on the rear frame screws on my .357 Blackhawk that I was able to break with some force.

 

[Geronimo-7]

Thanks for the advice. I appreciate it.

 

[Nhsport]

A good sized auto parts store (usually one of the chains) will have a whole rack of thread locker stuff. Just read the labels ,you don't want permanent,just anti vibration. Use just a tiny bit,you don't want the extra messing up the inside of the gun. Clean the screw and hole with alcohol to cut any oil on the threads first.