New LCP going back to Ruger

Status
Not open for further replies.
FWIW, I had an original LCP for years, put between 500 and 700 rds through it, both premium and target loads. It's the only gun I've ever owned that had literally zero failures of any kind from the first shot to the day I traded it. :cool:
 
I’m hoping it will function right now. I really like the gun. It’s very accurate for what it is.
 
My LCP was just dropped off at the fedex near me, no reason for a new gun to have FTF, FTE, and double feeds in less than 100 rounds through it, Never had an issue with ruger revolvers before but this is my second LCP that hasnt worked right.
 
The Evangelist Cowboy said:
My LCP was just dropped off at the fedex near me, no reason for a new gun to have FTF, FTE, and double feeds in less than 100 rounds through it, Never had an issue with ruger revolvers before but this is my second LCP that hasnt worked right.
Click to expand...
I understand and agree. The gun I just got back was a replacement for my original. I am hopeful that we finally get functional guns. I know many folks have LCPs that run flawlessly. My friend has three between him and his father that run well. Good luck and keep us posted.
 
beagler said:
I understand and agree. The gun I just got back was a replacement for my original. I am hopeful that we finally get functional guns. I know many folks have LCPs that run flawlessly. My friend has three between him and his father that run well. Good luck and keep us posted.
Click to expand...
Thank you, I hear the same "I have 900 rounds through it flawlessly" wish I could experience that. Hopefully soon, they said theyre running a week turnaround.
 
The Evangelist Cowboy said:
Thank you, I hear the same "I have 900 rounds through it flawlessly" wish I could experience that. Hopefully soon, they said theyre running a week turnaround.
Click to expand...

I have had a number of LCP's (about 4 of them and many of them sent back for repair) since they first came out. I feel as if I know that gun better than many. First of all, they were all reliable guns for me. However, they do not hold up well with a lot of rounds down range. I think the longest one ran to about 2200 rds
At 1500 rounds, you really need to start checking for stress related issues. In the Frame, the rails and the Polymer grip.
I read many post now of the LCP's. And it seems like they have more problems than any I remember. I think Ruger has a tendency to over use their manufacturing equipment, not change out worn parts. (just speculating) as it seems later runs of there guns develop more problems.. I am one of rare individuals that actually enjoys shooting pocket guns. Shoot them almost weekly. I really came to the conclusion that Ruger designed the gun for the Mass market, and that market is for folks that will not train often with them and consequently not put many rounds down range. And they are probably the most sold gun in the world. I bet millions have been sold. The build quality IMO is really on the cheap side. Nothing special about them. They use a aluminum chassis, and make no attempt to place steel inserts etc. at the stress points. Cheap to build, cheap to replace when one goes down. And I believe that they know most will not shoot them much and only a small percentage will be replaced anyway.
If you are a avid enthusiast shooter of pocket guns, or believe that like any gun you need to train often, (which I do) there are many other 380's out there that are much better quality.
However if you are the type that just wants to CCW a small pocket gun, they will for the most part get the job done. Or at least they use to.
My advice is to buy the Gen 2 and not the LCPll. I believe the Gen 2 is actually a better made gun and has fewer problems. I do not think it is a coincidence that they still make the Gen2. The cost is inexpensive, so I would buy two. One for CCW and one for Range work. Then when one goes down, just rotate it, and let Ruger send you another one. The caveat is they are not pleasant guns to shoot. But you can adjust to them over time.
 
Jeb Stuart said:
I have had a number of LCP's (about 4 of them and many of them sent back for repair) since they first came out. I feel as if I know that gun better than many. First of all, they were all reliable guns for me. However, they do not hold up well with a lot of rounds down range. I think the longest one ran to about 2200 rds
At 1500 rounds, you really need to start checking for stress related issues. In the Frame, the rails and the Polymer grip.
I read many post now of the LCP's. And it seems like they have more problems than any I remember. I think Ruger has a tendency to over use their manufacturing equipment, not change out worn parts. (just speculating) as it seems later runs of there guns develop more problems.. I am one of rare individuals that actually enjoys shooting pocket guns. Shoot them almost weekly. I really came to the conclusion that Ruger designed the gun for the Mass market, and that market is for folks that will not train often with them and consequently not put many rounds down range. And they are probably the most sold gun in the world. I bet millions have been sold. The build quality IMO is really on the cheap side. Nothing special about them. They use a aluminum chassis, and make no attempt to place steel inserts etc. at the stress points. Cheap to build, cheap to replace when one goes down. And I believe that they know most will not shoot them much and only a small percentage will be replaced anyway.
If you are a avid enthusiast shooter of pocket guns, or believe that like any gun you need to train often, (which I do) there are many other 380's out there that are much better quality.
However if you are the type that just wants to CCW a small pocket gun, they will for the most part get the job done. Or at least they use to.
My advice is to buy the Gen 2 and not the LCPll. I believe the Gen 2 is actually a better made gun and has fewer problems. I do not think it is a coincidence that they still make the Gen2. The cost is inexpensive, so I would buy two. One for CCW and one for Range work. Then when one goes down, just rotate it, and let Ruger send you another one. The caveat is they are not pleasant guns to shoot. But you can adjust to them over time.
Click to expand...
I'm an avid shooter of small 38s , I frequently do 400 round sessions with j frame size guns mainly a taurus 85. I've decided to go back to dedicated .38s for a backup gun vs the lcp . Main carry is a .357
 
I shoot my LCR9mm for the many reasons someone carries the 357 version even if shoots the 38. Both the 357 and the 9mm are built around Stainless Steel vs the Aluminum. Even though they weigh more, I feel it is worth it for the long run and and I shoot a lot of rounds out of it as well. Once again, the steel out of these small guns is worth the price of admission alone.
 
Update... I shot over 100 rounds today of various fmj and jhp without any issues. Finally! It seems the new slide assembly is working as it should. It’s now resting in my pocket.
 
Paul7 said:
My LCP was so bad even Ruger gave up on it and sent me a refund.
Click to expand...

Lol, I actually had a couple like that. I know that Ruger will offer a refund many times. And will also offer you a discount on another purchase. The LCR would be a good choice if you like revolvers. A much better built product. Or apply it to something like the SR9 series, which are built very strong and are very durable. What gets me is that those pistols are now selling for around $350. Only about a hundred or so more than the LCP? Doesn't make sense. I guess it is just good old fashion marketing.
 
The Evangelist Cowboy said:
Called them yesterday and they said the same thing about replacing the slide assembly, its shipping back to me now. Hopefully mine will be like yours.
Click to expand...
I hope so too. I really like the gun. It’s very accurate for what it is. Ruger is more than willing to help so keep using them if needed. Good luck!
 
I hear ya Brother. To me, hunting with Beagles was the best fun I have hunting anything. Yes, many fond memories of some great dogs I have owned. Sorry about you loss the last one. I remember one in particular. Had him out on dirt road when he was just a puppy. That little sucker picked up a trail on was gone. He was so young he could barely made it over a small log. Dang if he did not get that rabbit to circle back on the road after a good chase.
Thanks for the memories.

If my Beagles are not in Heaven, then what is the Point?
 
Jeb Stuart said:
I hear ya Brother. To me, hunting with Beagles was the best fun I have hunting anything. Yes, many fond memories of some great dogs I have owned. Sorry about you loss the last one. I remember one in particular. Had him out on dirt road when he was just a puppy. That little sucker picked up a trail on was gone. He was so young he could barely made it over a small log. Dang if he did not get that rabbit to circle back on the road after a good chase.
Thanks for the memories.

If my Beagles are not in Heaven, then what is the Point?
Click to expand...
Yes Sir! I remember when my favorite pup first found that sweet smell of a bunny and went nuts! The next best thing was when she opened up for the first time. Good times....
 
I had the same issue with a new LCPII. The gun came back within two weeks. Ruger replaced the barrel and extractor and the gun has been perfect some 500 rounds later.

A dab of florescent paint on the front sight really helps.
 
I’m glad to hear that Ruger has fixed your gun too. I hope ours hold up. I plan to keep shooting it, but I’m feeling good about it finally.
 
Status
Not open for further replies.

Similar threads

S
  • Locked
For the KT fanboys...new Ruger LCP shooting video
2
Replies
31
Views
2K
Johnny Guest
J
O
  • Locked
Review: Ruger LCP
2
Replies
26
Views
6K
barnetmill
B
Mn Fats
  • Locked
Do I send it back to Ruger?
2
Replies
47
Views
4K
murf
murf
F
  • Locked
Bummed about my new LCP
2 3
Replies
59
Views
4K
PX15
P
C
  • Locked
Ruger LCP second range report
Replies
18
Views
1K
jocko
J
Back
Top