Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Im looking to reloading some 9mm i have some 124gr copper coated hollow points. i only have bulleye powder.i have the lee modern reloading book cant find the load and col for that bullet.
Alliant shows 4.4gr BE under a 124gr GDHP. I would reduce by 10% since your using plated projectiles.
1.12" OAL should work ok, that's what I load most all my 9mm length to using 115/124gr boolits. Use all info at your own risk.
Search different mfg's online reloading manuals and get a few more printed copies to have on hand. Lyman's 49th, Speer's, Hornady's etc. are a pretty good sources of info.
I like the Hornady manual too. If you are loading for pistol, Reloading For Handgunners by Patrick Sweeney is well worth your time. You may want to study up on the manuals and hang around the forum for awhile before starting. It can be pretty dangerous and you must pay close attention.
Find a fellow on here who doesnt mind answering your questions in PMs and such will really help too. I'm new also so that's about the only advice I feel Im qualified to help you with. Good luck!
Im looking to reloading some 9mm i have some 124gr copper coated hollow points. i only have bulleye powder.i have the lee modern reloading book cant find the load and col for that bullet.
If your bullets are made by a major manufacturer, they probably have recipes, too.
Also, there is a series of books that contain nothing but recipes for a particular chambering. Called, collectively, "One Book, One Caliber" (about $10). They contain photocopies of the recipe pages from all the major loading manual publishers. If there is a recipe for a particular combination of components, they most likely will have it
There is considerable support for spending the money to have the actual complete manuals from the major publishers. The early chapters of most manuals have "how to" instructions and, more importantly, "why for" discussions. Also, reading descriptions from different authors will let you hear different "voices" and writing styles, some of which will "speak" to you better than others. What aspects of the loading process some books cover thinly, others will cover in depth.
You need to get your self a Lyman 49 loading book. that way you will have a good chance of find more reloading data. 2 books will be better GOOD LUCK. DO NOT BEE AFRAID TO ASK FOR HELP
About those manuals everybody keeps harping about--READ THE FIRST HALF OF THE BOOK and most all questions will be answered and you will be much more educated and much safer when loading your own. ETA: get the actual books rather than electronic versions-that way when the lights go out you'll still have access to your data.
I've never used PLATED bullets, which seems to be what you have, but I THINK you should reduce charges from jacketed data to more what you would use for cast lead bullets.
Bullseye is one of the all time best pistol powders ever made, but it is a very "fast" powder which builds max pressures very early in the burn cycle. As the name suggests, it is very good for lighter target loads. DO NOT go chasing high velocities with fast powders, and pay extra attention when charging cases. Max charge with Bullseye will not amount to much volume of powder, which means you could probably fit half a dozen max charges in a case and still seat a bullet. An accidental double-charge will appear almost the same as a normal single charge when looking into a case and can easily be missed upon inspection. But you'll know about it when it goes off.
Don't get me wrong, Bullseye is an excellent choice-just be careful and don't try any hotrodding.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.