hddriver1
Member
Took my pistol (8 shot single stack) to the range for break in per Para's recommendation. Used CCI 230 gr. FMJ. with the first 150 rounds loaded to magazine capacity ( 8 rounds ) and had about 15 FTF. This barrel has the integral feed ramp. The round would stick tip down and tail up. I then shot the last 100 rounds at 7 rounds per mag and still had the same problem. I pulled the slide all the way back (did not rely on slide lock) and same problem. Always happened on the first or second round, after that they would all feed. The barrel feed ramp and the frame feed ramp are even, I know Mr. Kuhnhausen recommends 1/32" step (on a regular frame feed ramp) but I don't know about a Para ramp. I inspected the case that would hang up but could find no notable damage but I didn't try to force the round either. I'm waiting on Para for an RMA but I thought I would ask the collective.
Thank you
Pat
Thank you
Pat