Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Highly doubtful, because the upper part of the two hammers are entirely different shapes and configurations. I suppose if someone did a lot of cutting and welding they might create something, but as Jim said you'd have to look over both hammers and compare them.
I have examined a lot of "open top" Colt cap-lock and cartridge converted revolvers, as well as a fair number of S.A.A's, and this is the first time I've heard this proposal.
However years ago some of the fast-draw folks that were into fanning would cut and bend the hammer spur to make a more vertical profile. If that is what you have in mind, yes - it can be, and has been done.
However I do not recommend fanning or otherwise speed shooting an S.A.A. unless it has gone through some major modifications by a gunsmith specializing in this work.
Actually not wanting the more vertical hammer. I was lookin at a open top for concealed carry and the hammer sits too high. The 1873 style sits more closer to the grip.
Yup... The did that because you are suppose to place your thumb across the spur when cocking the hammer, rather then with the front joint in line with the spur.
You can cut off the present spur, weld a block of steel on the back, and shape it into whatever you want. That too has been done before.
Actually not wanting the more vertical hammer. I was lookin at a open top for concealed carry and the hammer sits too high. The 1873 style sits more closer to the grip.
Yes, lowering the hammer can be done. Here's my 1860 Replica (with a cartridge conversion cylinder) that would look somewhat similar to a '72 Open Top to give you an idea what it might look like.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.