BADUNAME30
Member
Here is a quote of mine from the original post below.
As i've stated before. I have no experience with wheel gun innards as far as 'tunin' goes so although this one looks to me to clearly have a trigger issue, I'm not knowing ecatly what to look for on these parts.
Here are two views of the trigger.
And a comparrison of this trigger(left one), along side a trigger from my no name italian '51 that ( to me) shows no issues.
Now the hammer from different views.
The issue is that the hammer would go to full cock and and would fire normaly using the trigger, but you could also apply forward pressure with your thumb to the hammer and it would 'fire' to the half cock position.
Now, the hammer won't lock into full cock at all.It feels like it's tryin to lock in but can't and snaps right back to the half cock position.
With this gun bein 25 years old my first aproach will be to take it down and clean it's innards but i spect i should know what to look for mechanicaly while i'm in there.
As i've stated before. I have no experience with wheel gun innards as far as 'tunin' goes so although this one looks to me to clearly have a trigger issue, I'm not knowing ecatly what to look for on these parts.
Here are two views of the trigger.
And a comparrison of this trigger(left one), along side a trigger from my no name italian '51 that ( to me) shows no issues.
Now the hammer from different views.