Travelin Man
Member
- Joined
- Aug 11, 2009
- Messages
- 1
I just purchased a polymer frame sungle stack 9 MM (PPS) and want to know what you folks use to degrease and flush out the crud from your frame.
I have used "Lube Job" to flush it out but it doesn't work all that great as there is not a lot a pressure in the stream and it also doesn't degrease.
I use non-chlorinated brake cleaner on my slide and barrel and I won't use that stuff on my polymer frame.
Any suggestions?
I have used "Lube Job" to flush it out but it doesn't work all that great as there is not a lot a pressure in the stream and it also doesn't degrease.
I use non-chlorinated brake cleaner on my slide and barrel and I won't use that stuff on my polymer frame.
Any suggestions?