My FIL gave me his Dillon 550B progressive press. I'm working up a load for my .300WM. I chose two powders to start, RL 22 and IMR 4831, because these seemed to be among the most popular on reloadersnest.com.
I'm wondering if there are other powders that would be appropriate for .300WM that might flow better in my press. My charge weight variation with these powders is typically +/- 0.5 grains, but there is the occasional +/- 1.0 grain charge. I'd like to avoid weighing each charge if I can.
I'm focusing on 180 gr. bullets for now. I haven't had a chance to get to the range and try any of my loads yet. I'm just wondering if there might be a better powder. Thanks for suggestions.
I'm wondering if there are other powders that would be appropriate for .300WM that might flow better in my press. My charge weight variation with these powders is typically +/- 0.5 grains, but there is the occasional +/- 1.0 grain charge. I'd like to avoid weighing each charge if I can.
I'm focusing on 180 gr. bullets for now. I haven't had a chance to get to the range and try any of my loads yet. I'm just wondering if there might be a better powder. Thanks for suggestions.