schneider38
Member
- Joined
- Jan 22, 2007
- Messages
- 12
I just picked up a 380 ppk/s-1 (SW) the other day. Took it to the range this afternoon and put about 300 rounds through it. I have no problems whatsover in regards to feeding, no jamming. However every so often it would misfire and I would have to pull the trigger several times to get it to fire. This happened about 20 times or so. I thought maybe I got a batch of ammo with hard primers however it happened with all three brands of ammo I was using.
When I arrived home, I gave the gun a good cleaning, and inspected the innerworkings of the slide, and didnt find anything out of the ordingary with the firing pin, it travels nice and smooth through its channel. So I moved my attention to the hammer, I figured maybe the hammer isnt hitting the pin hard enough. I tried to acess whether or not the hammer spring is adjustable but couldnt figure it out unless I took the whole mechanism apart, which I really didnt feel like doing.
So my question is, is there a way to adjust the tension of the hammer spring on the ppk/s or does anyone else have any idea why this may be happening?
Thank you
When I arrived home, I gave the gun a good cleaning, and inspected the innerworkings of the slide, and didnt find anything out of the ordingary with the firing pin, it travels nice and smooth through its channel. So I moved my attention to the hammer, I figured maybe the hammer isnt hitting the pin hard enough. I tried to acess whether or not the hammer spring is adjustable but couldnt figure it out unless I took the whole mechanism apart, which I really didnt feel like doing.
So my question is, is there a way to adjust the tension of the hammer spring on the ppk/s or does anyone else have any idea why this may be happening?
Thank you