I loaded up some 45 ACP 200gr LSWC with 4.8gr WST seated to 1.250. I loaded 25 Missouri Bullets and 50 Penn Bullets. Wanted to see which one was more accurate before I ordered up several K.
Here is what my brass/primers look like with this load.
The cartridge on the left has no pin strike mark left, it has been filled in. That mark you see at about 7 O'clock is raised and sharp.
The center cartridge has a little pin strike left, but not much. It also has the raised sharp piece at the 9 O'clock position. The primer on the right looks normal to me.
Here is what my brass/primers look like with this load.
The cartridge on the left has no pin strike mark left, it has been filled in. That mark you see at about 7 O'clock is raised and sharp.
The center cartridge has a little pin strike left, but not much. It also has the raised sharp piece at the 9 O'clock position. The primer on the right looks normal to me.