chamokaneman
Member
Yeah, I'm definitely using the correct ram. I have two Lee auto prime tools. One has a tray, one I have to hand feed. Either way, I look at the primer before I put the brass in the shell holder. In the rare instance that a primer isn't laying on top of the ram in exactly the right configuration, I raise the ram a little, lower the ram, and everything is fine. They work fine for me. The important thing is to look before you squeeze.
I should also say that sometime if raising and lowering the ram doesn't tip the primer back over where it belongs, I'll raise the ram and tip it back over by hand. Hardly ever happens but put a couple primers in sideways and you take the time to look carefully.