SlimReaper67
Member
- Joined
- Aug 30, 2022
- Messages
- 27
Hello all..I just started reloading for the .32 and had some questions on case size and seating depth related to pressure. I'm using 78gn round nose bullets with a rather blunt profile. This requires them to be seated to .924" in order to chamber in my guns (both a Beretta 81 and FEG AP7.65). That seating depth is quite a bit deeper than load data. I first used some red dot powder, starting at 1.5gn and working up to 2gn. All rounds have cratered primers, which I take to mean the case pressure is too high. Red dot takes up a lot of case room, but tight group is nearly 2x as dense, and I was wondering if it would be better suited to my load dimensions. Any help would be appreciated. Thanks!