rhino210
Member
It’s a raining cats and dogs, you’re out of powder and bullets, can’t go to the range, nothing on the tube and the wife and kids are gone.
What to do?
Drink heavily? Sleep? Re-read the ABC’s of Reloading? All good ideas…but….
I know BUILD something!!!
Take a plastic Folgers coffee can
Some electrical conduit
A motor, speed control and reduction gear from an old house humidifier
A brass female end garden hose repair connector
Electrical tape
An old set of roller skate wheels
Some 2X4’s
An old computer electrical cord
The cover from a 12V a/c adapter
Several screws
And Voila! The first ever Red Neck Case Tumbler (pat. pend)
It turns at 5 rpm on low speed and a blistering 6 rpm on high. It took about 12 hours to polish 100 .45 cases using corn cob media mixed with crushed walnut, both purchased from the pet store. The indented handles on the coffee can stirred the can every time it turned. The electrical tape on the main roller and the coffee can provided additional friction so the roller didn’t just spin in place. The brass garden hose end spins within itself at the other end of the main roller and I used some RCBS case lube for lubrication.
Total amount invested less than $5.00 and about 2 hours in the garage! Man Country!
I’ll post the pics in the following threads
What to do?
Drink heavily? Sleep? Re-read the ABC’s of Reloading? All good ideas…but….
I know BUILD something!!!
Take a plastic Folgers coffee can
Some electrical conduit
A motor, speed control and reduction gear from an old house humidifier
A brass female end garden hose repair connector
Electrical tape
An old set of roller skate wheels
Some 2X4’s
An old computer electrical cord
The cover from a 12V a/c adapter
Several screws
And Voila! The first ever Red Neck Case Tumbler (pat. pend)
It turns at 5 rpm on low speed and a blistering 6 rpm on high. It took about 12 hours to polish 100 .45 cases using corn cob media mixed with crushed walnut, both purchased from the pet store. The indented handles on the coffee can stirred the can every time it turned. The electrical tape on the main roller and the coffee can provided additional friction so the roller didn’t just spin in place. The brass garden hose end spins within itself at the other end of the main roller and I used some RCBS case lube for lubrication.
Total amount invested less than $5.00 and about 2 hours in the garage! Man Country!
I’ll post the pics in the following threads