jmorris
Member
- Joined
- Sep 30, 2005
- Messages
- 24,219
I 100% agree my load master will not indexed correctly talk to lee about it and they said I don’t have the Shell carrier Adjusted correctly I sent them a video of me adjusting it the way the manual says and still not working They have not responded to that video but I looked on the Internet for hours looking for an answer I found an aftermarket part that might work should be here tomorrow if it does I’ll let you guys know about it if it fixes the problem
I think part of the problem is the manual and the information they contain.
For example, the manual for Dillon’s 5 station presses is 74 pages.
https://dilloncdn.com/manuals/dillon-xl750-manual-english.pdf
Hornady’s for the AP is 32 pages.
https://press.hornady.com/assets/pc...Load---AP----Press-Instructions1515698795.pdf
The loadmaster is 10.
https://leeprecision.com/files/instruct/LM3231.pdf
As you have found there is critical information to be learned that’s not in those 10 pages.
And that’s up from the 8 page manual they used to have.
https://images-na.ssl-images-amazon.com/images/I/91GA8YOA-TS.pdf
I spent a week or so learning about them and setting the one I had up and will say if they came from Lee running like it did and they had a better manual so folks could easily keep them running, they would be more popular.
The priming system is actually more of a weakness than the indexing system, once you get it figured out. I had a video on indexing but PB is holding it hostage, this might be worth watching though.