Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Rem 700 stock/bedding questions

Discussion in 'Rifle Country' started by RobG5538, Jul 20, 2007.

Thread Status:
Not open for further replies.
  1. RobG5538

    RobG5538 Member

    Joined:
    Jul 24, 2006
    Messages:
    112
    Location:
    Nor. Cal.
    I acquired a used Rem 700 BDL in 7mm RM. It shoots fantastic but was a little "tired" so I had the gun re-blued and fitted a take-off SPS stock. I am going to shoot off a bipod and noticed the stock is somewhat flexible at the barrel end. I was going to bed the rifle in some manner but was told by a large, popular magazine mail order company that synthetic stocks cannot be bedded in any manner, pillar or glass. Is this indeed the case or is it possible and what will work the best? I would hate to ruin what has been a very accurate shooter.

    Thanks
     
  2. streetstang67

    streetstang67 Member

    Joined:
    Jul 8, 2006
    Messages:
    178
    Location:
    SC
    I just glass bedded my Rem 700 SPS tuesday. Only thing I had to do first was fill the hollow parts of the stock with fiberglass. It worked fine.
     
Thread Status:
Not open for further replies.

Share This Page