Remington 7615 Disassembly

[Anteater1717]

How do I disassemble mine?

 

[R.W.Dale]

I wouldn't if I were you unless it's REALLY necessary. Disassembly involves removing the bbl in order to remove the bolt from the front of the action. If you're mechanically inclined it's a job you can do yourself bit it's still a lot of work. The last remmy 7400 (same thing) I detail stripped I used a large crescent wrench to remove the barrel stub retaining nut.

I probably have close to 1000 rounds through my 7615 and haven't detail cleaned it yet and it shows no sign of needing it anytime soon. If I were you I'd just remove the stock, trigger guard and magwell assy and clean everything out with a aerosol cleaner of your choice.

 

[rcmodel]

All you can do is pop out the two pins and take out the trigger group.

The bolt won't come out of a Remmy pump rifle without taking the barrel off.

And taking the barrel off is a gunsmith operation for most folks.

rcmodel

 

[Anteater1717]

I tried to remove the buttpad so I could remove the stock, but I can't mannage to remove it. Any tips?

 

[R.W.Dale]

make certain your screwdriver fits the screws PERFECTLY before attempting to remove the buttpad and push inward really hard against the screws when removing them. Some oil on the shank of the screwdriver helps a lot. Those limbsaver pads are really grippy on metal