walnut1704
Member
I have a Lewis Lead Remover, but I've found another method that works just as well. Cut a patch out of one of those yellow Lead Remover cloths and run it down the barrel with a brass (not plastic) jag tip (not a slotted tip).
With a good tight fit, it will clean it right out. It should be tight...like you've got to work to get it started. You'll need a proper rod. Shim the Lead Remover cloth with a standard patch if it's not tight enough, but that should not normally be necessary unless you are using a .40 jag for a .41 or something like that.
With a good tight fit, it will clean it right out. It should be tight...like you've got to work to get it started. You'll need a proper rod. Shim the Lead Remover cloth with a standard patch if it's not tight enough, but that should not normally be necessary unless you are using a .40 jag for a .41 or something like that.