Ifishsum
Member
I use Imperial sizing wax (now sold by Redding) with my fingers, just enough to feel slightly greasy on the lower 2/3 of the case and I do every other one. And a little swipe on the case mouth every 3-4 with whatever is still on my fingers. It's a little slower than a pad or spray, but it gives me a chance to handle and inspect each piece. I don't usually bother removing it either (I do tumble to clean prior to resizing); by the time I charge and seat the bullet there is no detectable greasiness left, either it dries or comes off during other handling. When/if I do remove it I use a rag, as I feel like tumbler media loaded with case lube is not really removing as much as redistributing it anyway. YMMV of course