RIA 1911 .45 ACP Tactical

Status
Not open for further replies.
I like Wilson Combat 47D mags. I also have some of their metal baseplate, flush fit mags from Wilson and Metalform. My 1911 gunsmith swears by the Metalform mags, so those and the wilson's would be my recommendation.
 
I like the CMC "power mags" in my RIA's (including the 10 round) work great for me YMMV
 
I see the prices of gasoline there is alot less than it is here. We pay $3.85 to $4.00 a gallon for super unleaded gas here.
Click to expand...
Pretty sure that's an old pic... I haven't seen $2.xxx regular in a few years, and for a while I lived across the mountain in East TN, where gas is 10 to 20 cents cheaper than western NC.
 
bds said:
You can get both to see which works better for you. ;)

You may also want to get some replacement recoil springs. With more generous tapered chamber/mouth RIA Tactical has, it will suffer less "return to full battery" issues but quality recoil springs will soften the recoil and muzzle flip.

Most factory 16 lb springs will quickly become 15 lb springs (some even after several hundred rounds) and add to slide failing to fully return to battery issues and increase the muzzle flip/felt recoil.

I use Wolff variable power and Wilson Combat recoil springs (around $7). 16/16.5/17 lbs for lighter target loads and 17/18/18.5 for factory/defensive rounds. They reduce the muzzle flip/felt recoil and makes shooting more comfortable/enjoyable. :D
Click to expand...

That's what I will do is get one Wilson and one CMC. But which one would I get? I notice there seems to be different models of clips in both brands and I don't mean 7, 8 or 10 rounds just model name. I will get the 8 rd. magazines.
I have never heard of changing the magazine springs or recoil springs in pistols like Glock, Sig, Browning, Smith & Wesson or Beretta. Is this something specific to the 1911 gun?
 
I second the mcCormick mags. They work every time for me.
 
stinger 327 wrote,
I have never heard of changing the magazine springs or recoil springs in pistols like Glock, Sig, Browning, Smith & Wesson or Beretta. Is this something specific to the 1911 gun?
Click to expand...
Springs are wear items. They will all wear out with use. It doesn't matter what type of gun you have, if you use it enough, the springs will wear out.

That's what I will do is get one Wilson and one CMC. But which one would I get? I notice there seems to be different models of clips in both brands and I don't mean 7, 8 or 10 rounds just model name. I will get the 8 rd. magazines.
Click to expand...
Get the stainless 8 round McCormick PowerMag http://www.cmcmags.com/Powermags.html

also available at Brownell's http://www.brownells.com/magazines/...avs|Manufacturer_1=CHIP MCCORMICK CUSTOM, LLC.

There are lots of Wilson 47D lover's, but I think the ETM, if you want an 8 rounder, or the 47 if a 7 rounder is OK, are both better mags.

Top Gun Supply http://www.topgunsupply.com/wilson-combat-1911-magazines/

Don't buy 10 round mags.
 
I've shot plenty of 1911s owned by friends over the years, but never owned one until I bought a gently used RIA Tactical 45 from a coworker about a year-and-a-half ago ($400!!!). I have yet to find a round that won't feed or cycle it, FMJ or "ash trays." In fact, my favorite handload for it is a 185gr XTP over 5.0gr of HP-38...a light bullet over a light load that functions just fine.

If the experiences of most RIA owners is any indication, I think you'll find it to be a good, reliable firearm. Enjoy!
 
JTQ said:
Springs are wear items. They will all wear out with use. It doesn't matter what type of gun you have, if you use it enough, the springs will wear out.


Get the stainless 8 round McCormick PowerMag http://www.cmcmags.com/Powermags.html

also available at Brownell's http://www.brownells.com/magazines/...avs|Manufacturer_1=CHIP MCCORMICK CUSTOM, LLC.

There are lots of Wilson 47D lover's, but I think the ETM, if you want an 8 rounder, or the 47 if a 7 rounder is OK, are both better mags.

Top Gun Supply http://www.topgunsupply.com/wilson-combat-1911-magazines/

Don't buy 10 round mags.
Click to expand...

Thanks for all that info
Why not 10 rd. mags?

On the CMC mags there are two different types what are the differences between Power Mag Plus and Power Mag besides a few dollars more for the Power Mag Plus?

207-145-228WB
Power Magazine, 8-Round
Mfr Part: 14131
$27.99
Cartridge: 45 Auto (ACP)
Capacity: 8-Round
Finish: Stainless Steel

Power Plus Magazine, 8-Round
Mfr Part: 12131
$34.99
In Stock
Cartridge: 45 Auto (ACP)
Capacity: 8-Round
Finish: Stainless Steel

Wilson Combat #47D 1911 Govt .45 ACP 8rd magazineSKU: 47D
$31.95
This Item is Confirmed - IN STOCK - Ready to Ship

Looks like I should try one Wilson Combat mag #47D and one of the CMC mags Power Mag or Power Plus?
 
Last edited:
On the CMC mags there are two different types what are the differences between Power Mag Plus and Power Mag besides a few dollars more for the Power Mag Plus?
Click to expand...
The PowerMag Plus is basically a follower that won't ding the feed ramp of aluminum framed guns. You have a steel framed gun, it is not a problem for your gun. Save the money, get the regular PowerMag. Re-read the Hilton Yam article linked above for more information. He talks about the PowerMag vs PowerMag Plus in that article.
 
stinger 327 wrote,
Why not 10 rd. mags?
Click to expand...
As I said in post #2
The single stack 1911 in .45ACP is not a 10 round pistol. If you want that capacity, you should pick another gun.

I often recommend this article from the late Mr. Stephen Camp's blog to those new to 1911's.

http://hipowers-handguns.blogspot.co...11-45-acp.html
Click to expand...
As I said in post #11
The pecking order typically for reliable mags, all things being equal, are 7 round mags (the mag the 1911 was designed for) are the most reliable, then 8 round mags, followed by 10 round mags, and you can find 15 rounders somewhere, but they are really just a novelty (or paperweight) item.
Click to expand...
 
JTQ said:
The PowerMag Plus is basically a follower that won't ding the feed ramp of aluminum framed guns. You have a steel framed gun, it is not a problem for your gun. Save the money, get the regular PowerMag. Re-read the Hilton Yam article linked above for more information. He talks about the PowerMag vs PowerMag Plus in that article.
Click to expand...

:Dthanks again.
 
One lesson I learned is to not buy a bunch of any mag, even if they are very highly rated by what seems like everybody on the forums. Buy one of the more well regarded mags and see if your gun likes them. If it does, then buy more.

The most recommended mags for 1911's on just about all the forums, in alphabetical order are CheckMate, Chip McCormick, Tripp Research, and Wilson Combat. Everybody has a opinion as to what is the best. Some will use nothing but Brand X. Others will say Brand X is the worst mag they've ever used. You'll need to experiment to see what works best for your gun.

Some places where I've bought mags in the past

Top Gun Supply http://www.topgunsupply.com/1911-magazines/

Brownell's http://www.brownells.com/magazines/h...|Make_3=1911

there is also factory direct

Chip McCormick http://www.cmcmags.com

Tripp Research http://www.trippresearch.com/store/store_1911.html

Wilson Combat (they have a Labor Day Sale right now) http://shopwilsoncombat.com/Full-Siz...departments/2/
Click to expand...

I hope you guys are happy! This thread cost me money. I bought 4 ETM mags while they were on sale.
 
Then too, a lot of shooters aren't really shooters at all, but gun buyers. They buy a gun, put a box of (gasp! Expensive!) ammo through it, and put it away.
Click to expand...

Unfortunately this is true.

These people are quite likely to buy a $350 1911, if it looks like a thousand dollar Colt or $1500 custom. Will they have gotten a good deal?
Click to expand...

This on the other hand is not necessarily true. There are guys with safes full of expensive guns, that are not what I would call shooters. Then there's guys like me which would rather have a $450 Rock Island Armory tactical model that will eat any ammo you feed it, is durable, and shoots great! I rather spend all that money I saved by not buying a Colt or Wilson Combat on ammo and training. The shooter is the weapon, the gun is just a tool.
 
The feature that will be most noticeable to users is the ETM has a longer tube than the 47D. There are a couple of other less obvious things like the follower is a little different, and the tube is a little stiffer. You will find the ETM easier to seat than the 47D. The 47D's work great for many users, and I prefer the basepad on 47D's over the ETM, but the ETM is Wilson's best 8 rounder. Only you can decide if it is the right mag for you.

I know it seems like I'm repeating myself, but only because I am...

There are lots of Wilson 47D lover's, but I think the ETM, if you want an 8 rounder, or the 47 if a 7 rounder is OK, are both better mags.
Click to expand...
 
JTQ said:
The feature that will be most noticeable to users is the ETM has a longer tube than the 47D. There are a couple of other less obvious things like the follower is a little different, and the tube is a little stiffer. You will find the ETM easier to seat than the 47D. The 47D's work great for many users, and I prefer the basepad on 47D's over the ETM, but the ETM is Wilson's best 8 rounder. Only you can decide if it is the right mag for you.

I know it seems like I'm repeating myself, but only because I am...
Click to expand...

So many choices (so little money $$$) within each brand. I notice that with CMC they have two different mags also. I'll have to see what these Wilsons look like at the gunstore and compare the two, three or four different types.:confused:
 
I notice that with CMC they have two different mags also.
Click to expand...

As I said earlier, in the Chip McCormick line-up, just get the regular PowerMag. It is their best mag.

The PowerMag Plus is basically a follower that won't ding the feed ramp of aluminum framed guns. You have a steel framed gun, it is not a problem for your gun. Save the money, get the regular PowerMag. Re-read the Hilton Yam article linked above for more information. He talks about the PowerMag vs PowerMag Plus in that article.
Click to expand...
 
Status
Not open for further replies.

Similar threads

stinger 327
  • Locked
1911 .45 ACP pistols from Armscor
2
Replies
29
Views
2K
Aceoky
A
C
  • Locked
Rock Island Armory question?
Replies
7
Views
758
Fishslayer
Fishslayer
T
  • Locked
which magazines work best in a GI RIA 1911?
Replies
6
Views
2K
TroyUT
T
G
  • Locked
Anyone try the Taylors compact carry 45
Replies
4
Views
696
hardluk1
H
3
  • Locked
Does Chip Maccormick magazines work with RIA's?
Replies
12
Views
2K
Furncliff
F
Back
Top