Ring suggestions for CZ 457 Varmint

[Sniper66]

I'm buying a new CZ 457 Varmint .22 and buying this scope.
https://www.eurooptic.com/Meopta-MeoSport-R-3-15x50mm-SFP-4C-Riflescope-1047491.aspx
for it. I need a good set of medium rings to fit the 11mm dove tail. What would you guys suggest?

 

[troy fairweather]

I have a new set of Talley 30mm low cz rings if interested.There, 30czrl.

 

[Sniper66]

I have a new set of Talley 30mm low cz rings if interested.There, 30czrl.

not sure low rings will work for a 50mm scope, but thank you

 

[troy fairweather]

not sure low rings will work for a 50mm scope, but thank you

Ok just checking, these seem pretty high for lows, but that's typical with cz rings.

 

[Sniper66]

Ok just checking, these seem pretty high for lows, but that's typical with cz rings.

I know dovetail mounts tend to set low. I couldn't find the model number specific to the 457. I like Warne and Talley.

 

[troy fairweather]

I know dovetail mounts tend to set low. I couldn't find the model number specific to the 457. I like Warne and Talley.

these work with the 452,455,457,512,513.

 

[LoonWulf]

I have a set of 30mm CZ rings you can have, they should work fine with that 50. I MIGHT still have a set of talley 30mmm. Id have to dig, i dont remember seeing them in a while so may have given them away.

 

[sparkyv]

I use the Warne medium rings on my CZ455 on a scope with similar dimensions, Sniper66.

these work with the 452,455,457,512,513.

Well done, sir!

I have a set of 30mm CZ rings you can have, they should work fine with that 50. I MIGHT still have a set of talley 30mmm. Id have to dig, i dont remember seeing them in a while so may have given them away.

 

[Sniper66]

I have a set of 30mm CZ rings you can have, they should work fine with that 50. I MIGHT still have a set of talley 30mmm. Id have to dig, i dont remember seeing them in a while so may have given them away.

That is very generous of you. Some of the other CZs have 13mm dovetail. This one will have 11mm. Will that make a difference? Thanks a bunch LoonWulf. I'll send my address via a "conversation". I probably still have your contact info but would have to dig thru stuff. Tom

 

[LoonWulf]

That is very generous of you. Some of the other CZs have 13mm dovetail. This one will have 11mm. Will that make a difference? Thanks a bunch LoonWulf. I'll send my address via a "conversation". I probably still have your contact info but would have to dig thru stuff. Tom

No these are for the 11s, i had them on my 457.
I got your conversation message, but i cant reply to it for some reason.
ill have them out in the next day or so.

 

[Sniper66]

That is terrific. I'll send a suitable thank you when I mount them.

 

[greyling22]

Let me know how that scope is for you. I really like mine, but the illumination doesn't work unless I set it on 4 or higher. Do t know if it's the factory battery or the scope. Nobody at meopta answers the phone. Other than that, I do really like the scope though.

 

[45/30-06OKIE]

I'm buying a new CZ 457 Varmint .22 and buying this scope.
https://www.eurooptic.com/Meopta-MeoSport-R-3-15x50mm-SFP-4C-Riflescope-1047491.aspx
for it. I need a good set of medium rings to fit the 11mm dove tail. What would you guys suggest?

I got some Leupold "high" (more like medium lol) dovetail rings for my CZ 457 ProVarmint and I'm using a 44mm obj lens scope and it just clears the barrel... So idk what you would need to clear a 50mm obj lens...

 

[Sniper66]

I ended up ordering this scope with the BDC-3 reticle. It may be a fair amount more scope than I need, but it sets me up to switch it to a centerfire rifle if need be. I picked up a set of Warne M721 medium. Hope it's high enough. I'll let you know.
https://www.meoptasportsoptics.com/us/produkt/optika5-4-20x50-rd-16181/
BTW, I cleaned the rifle up, using a good wood cleaner on the stock. It shined up great. I'll run a brush thru the bore. to clean out any manufacturer gwadoo. I'll post a picture. when its ready to go.