Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Romanian SAR-1... a "good" AK?

Discussion in 'Rifle Country' started by 1KPerDay, Oct 6, 2006.

Thread Status:
Not open for further replies.
  1. 1KPerDay

    1KPerDay Member

    Joined:
    Jan 19, 2006
    Messages:
    12,702
    Location:
    Happy Valley, UT
    I know next to nothing about AKs other than I want one... is the SAR-1 a good variant? Romanian okay? What do you think's a good price for one in very good condition?

    Thanks.
     
  2. another person

    another person member

    Joined:
    Oct 6, 2006
    Messages:
    54
    I think that SAR-1s are the same as AK-47s but they do not come with the bayonet lug, flash suppressor, and they do not have folding stocks.
     
  3. grimjaw

    grimjaw Member

    Joined:
    May 9, 2005
    Messages:
    3,358
    Location:
    Arkansas
    1KPerDay, if www.ak47.net ever comes back up, you should check there for some info on the SAR1. Also, check out this page: http://www.gunsnet.net/Linx310/index.shtml

    For less than $400 in very good condition, the SAR1 is a good buy for an AK. Most of them have everything but a threaded barrel.

    jm
     
  4. 1KPerDay

    1KPerDay Member

    Joined:
    Jan 19, 2006
    Messages:
    12,702
    Location:
    Happy Valley, UT
    Thanks for the info so far. So I assume by that: I shouldn't pay more than $400 for one, right?
     
  5. Spencer

    Spencer Member

    Joined:
    Sep 26, 2006
    Messages:
    176
    Location:
    Georgia
    My dad told me how he actually went through the same thing you are when he was deciding on getting his first AK.

    After years of searching, we found a super high quality brand that IMO can't be beat.

    http://www.arsenalinc.com/

    Quality does come with a price though. A good arsenal will run about $800. If you're willing to spend it (I am), I definately recommend one of these fine guns.

    Arsenal recently discontinued many lines of the milled receiver AK, though. Milled is the type of receiver I prefer and many others do as well, they're really nice. If you can find a milled one, you better buy it fast before someone else does, because in the future the Arsenal milled lines will not be produced again until at least mid year 2007 and when they are it will be in very short limited quantity runs.
     
  6. 1KPerDay

    1KPerDay Member

    Joined:
    Jan 19, 2006
    Messages:
    12,702
    Location:
    Happy Valley, UT
    I'm not. Thanks for the info anyway, but since I don't really know if I'll like the AK type, I don't want to spend a mint on my first one. ;)

    I'm already having a hard time convincing myself to take $400ish out of my motorcycle fund.:D After all, I already have a lot of guns... and only 3 motorcycles.:scrutiny: LOL
     
  7. Spencer

    Spencer Member

    Joined:
    Sep 26, 2006
    Messages:
    176
    Location:
    Georgia
    That's understandable. But when you are ready to try the best of the best, get an Arsenal :). I think you'll learn to like the AK if you choose a good brand. Also, VEPR is a Russian brand. They're really nice too but unfortunately in about the same price range as Arsenal.

    Hahaha, I love motorcycles.
     
  8. 1 old 0311

    1 old 0311 member

    Joined:
    Jun 26, 2005
    Messages:
    2,672
    Location:
    Planet Earth
    The SAR-1 is a very good AK. Ck to see that the front sight isn't canted off to the side, some are.
     
  9. clange

    clange Member

    Joined:
    Dec 27, 2002
    Messages:
    786
    For a stamped fixed stock AK that shoots 7.62x39 you dont need any more than a SAR-1. $350-$400 high end.

    If you want better fit and finish, or certain options like folding stocks, you're going to pay more, but the SAR will go bang every time you pull the trigger just like any other well made AK.
     
  10. AK103K

    AK103K Member

    Joined:
    Dec 27, 2002
    Messages:
    5,774
    The SAR-1's can be decent guns if you get one with straight sights and no trigger slap. Some were better than others. I've seen them with badly canted sights and others with perfectly straight sights and some in between. Mine is one of the better "in betweens" and has a slight cant. It also had BAD trigger slap that could not be filed out, so I replaced it with a RSA trigger, and its great now. The SAR's were originally made to take the 30 round mags. The WASR's are the 10 round rifles modified here to take the 30 rounders. Other than that, they too are a SAR.

    The SAR's are not real pretty, but usually work fine for the most part. The crappy US trigger parts are usually the culprit if there is trouble. Buying a higher priced AK will not always guarantee you will get a more accurate or more reliable rifle. I have a Global Trades SSR-85C that is real pretty and cost about $250 more than my SAR. Its no better or worse accuracy wise than my SAR, and its had its disconnector fail. My WASR will out shoot it, and it was even cheaper than my SAR. Its been my experience, with the right ammo, the Russian made Saiga conversions are the most accurate.
     
  11. buck00

    buck00 Member

    Joined:
    May 10, 2005
    Messages:
    1,078
    Location:
    Lower Silesia, PA
    1KPerDay I would recommend the SAR-1. I bought one in 2003 for $330. The price has gone up since then I'm sure, but I love it.

    Mine shoots dead on up to 100 yards, has NEVER jammed, and can lay down 7.62 x 39 lead very fast. The one I got has solid sights and no trigger slap. I like the SAR-1 because you can use it blaze away on a farm at targets, cans, water bottles, effigies of Bin Laden, etc, but also rely on it for security during a civil disorder crisis. It is even short enough to negociate during house clearings, but keep in mind the round would over penetrate walls.

    I got 40 round mags online for like $12 each. Sure you could get a neat looking drum, but why spend $90 to $140 on a drum when you can pay much less for 40 round mags? I even taped two of them together with heavy duct tape and it worked well.

    The cons? It isn't as high in quality as a Norinco or any of those Russian ones another member pushed. But do you really want to spend $700 or $800 plus?? You have other guns, you have a motorcycle interest- don't over pay for something you don't need. There is no need to put perfume on a pig. It isn't an AR-15 or an M1A. It is an AK-47 clone, designed to take a beating and fire a whole lotta lead when you need it.

    Sure it lacks a bayonet- darn now I can't bayonet wounded defenders when I storm a fortified hill! :( It also lacks a cool looking muzzle brake. If you really want these so bad get a WASR (quality is a little less). But for a good rifle that can throw lead around generously, get an SAR-1.

    I don't think you should pay more than $400 for it, if you can find one. Good luck 1KPerDay.
     
  12. MM

    MM Member

    Joined:
    Jun 29, 2004
    Messages:
    435
    Location:
    Twangtown
    +1 on buck00's remarks, I added a slant break to mine with a set screw and blue thread lock. It hasn't moved in over 1K rounds, Also added a tapco trigger kit and powers retaining plate, along with a Ultimak rail. That's about all I want to do with it unless I get nuts and want to add an aimpoint, one of the few (or only) red-dots that willl co-witness with the irons.
    SatCong
     
  13. AK103K

    AK103K Member

    Joined:
    Dec 27, 2002
    Messages:
    5,774
    The Ultimak with a red dot on it, is hands down the best add on for an AK. If you use the right ring or mount, you can co-witness the iron sights with some of the dot sights.

    The Aimpoint is really your best bet, but if you want a quickly removed and replaced mount, with no loss of zero, you have to go with AR mounts that sit a little high to co-witness. They do pop right off though.

    Aimpoint ML2 on a Larue lever mount on a Saiga AK103K

    [​IMG]

    Tasco Pro Point on a SAR1. Its no longer on there as it didnt survive a fall from the truck to the car port floor. When I get around to it, its getting its own Aimpoint.
    [​IMG]
     
  14. P95Carry

    P95Carry Moderator Emeritus

    Joined:
    Jan 3, 2003
    Messages:
    16,341
    Location:
    South PA, and a bit West of center!
    Price range being discussed is about right IMO - they have gone up a bit.

    I have had mine 3 or 4 years now and it is great - and have really done little to it except for mounting a cheapo red dot. It shoots within minute of pie plate at 100 yards, which is fine by me.

    I have yet to fully cure the trigger slap mine has but found a piece of 6mm silicon tubing on the trigger is a reasonable semi cure for finger discomfort.


    [​IMG]
     
  15. clange

    clange Member

    Joined:
    Dec 27, 2002
    Messages:
    786
    $35 for a G2 fire control group from tapco will fix the trigger slap and give you a great trigger pull.
     
  16. P95Carry

    P95Carry Moderator Emeritus

    Joined:
    Jan 3, 2003
    Messages:
    16,341
    Location:
    South PA, and a bit West of center!
    Thanks - realize that - it's just a case of near total procrastination:D
     
  17. 1KPerDay

    1KPerDay Member

    Joined:
    Jan 19, 2006
    Messages:
    12,702
    Location:
    Happy Valley, UT
    Er... What's trigger slap? Sorry, I'm dumb. :D
     
  18. P95Carry

    P95Carry Moderator Emeritus

    Joined:
    Jan 3, 2003
    Messages:
    16,341
    Location:
    South PA, and a bit West of center!
    Think of it as being, with some AK's - a rather over strong trigger reset.

    After a shot is fired the trigger forcefully tries to return and reset - the effect then being sometimes a mild impact on the trigger finger. After a coupla mag's full of ammo it can get unpleasant.
     
  19. possum

    possum Member

    Joined:
    Oct 12, 2005
    Messages:
    8,942
    Location:
    Concord, N.C.
    If you really don't want to spend that much then you could go with a wasr, i don't like em, but that will run you less than the sar-1's. i think the sar-1's are a good deal and a great example of the ak. my dealer sells them for $325-350 back home, and i have never ever seen one that he had that wasn't in excellent shape. look around you can find a good deal, i just don' think you would be as happy with the wasr, but it is an option.
     
  20. soul_rapier

    soul_rapier Member

    Joined:
    Sep 10, 2006
    Messages:
    231
    Location:
    Kentucky
    if you don't want to send much on an Ak go with a norinco most of them are gun fit and finish but there are some out there thats not to good and the last time i checked still under $300 here's a pic of what i got arsenal on top polytech 2nd norinco with folding shock on buttom
     

    Attached Files:

  21. Thin Black Line

    Thin Black Line Member

    Joined:
    Sep 4, 2005
    Messages:
    3,213
    Location:
    Amerikan Twilight Zone
    I just saw a Jugo underfolder yesterday with a new barrel for $400.
     
  22. dglockster

    dglockster Member

    Joined:
    Sep 28, 2006
    Messages:
    68
    Location:
    DFW, Texas

    Attached Files:

  23. Gewehr98

    Gewehr98 Member

    Joined:
    Dec 24, 2002
    Messages:
    5,988
    I bought a SAR-1 on a whim...

    I already had a Bulgarian SLR-95, so I knew what the de-facto standard was with respect to semi-auto AK clones.

    Once I got over the rough appearance and finish of the SAR-1, I pulled the SLR-95 off home defense duty and replaced it with the latter.

    My SAR-1 had horrible trigger slap, so I installed the Tapco G2 trigger group. Since I'm not made of money, I also installed a bolt buffer to protect my investment, just like I did with the SLR-95. The previous owner of the SAR-1 really liked the laminated wood furniture, so I sold it back to him to recoup some of my investment, then installed a new K-Var forend and handguard, and a Romanian wire sidefolder. I threaded the muzzle and installed an original slant brake, and that's the configuration I'm most pleased with when it comes to range time or sitting by the nightstand:

    [​IMG]
     
  24. flip180

    flip180 Member

    Joined:
    Feb 10, 2004
    Messages:
    722
    I never fretted about the fit/finish of my Sar-1 when I had it. It was what I felt an AK should be like. The only issue is finding one with a straight front sight and gas block. Other than that, enjoy it for what it is. I will have another Sar-1 before too long. It was pretty much the only gun I've regretted selling. And this comes from a man that has an M1A Scout/Squad and a Stag AR in his safe. I've had "better" guns:rolleyes: but, there's something about AK's. The Sar-1 for all of it's ridicule for "shoddy" fit/finish deserves to have back it's place in my safe right next to the previously mentioned rifles.

    BTW, the G2 trigger is well worth the money along with mojo sights.

    Flip.
     
  25. 1911user

    1911user Member

    Joined:
    Jan 14, 2005
    Messages:
    1,078
    Location:
    Oklahoma
    An SAR-1 in good condition with a non-canted front sight tower and gas block would be a good, utility AK to have and keep. If you can find one for less than $400 in good shape, I'd buy it especially if it came with a few mags and/or ammo. They are nicer than the WASRs being sold now in many peoples opinion and that keeps the price of SAR-1s up. They were made in the same plant that made AKs for the Romanian Army; sort of commie mil-spec.
     
Thread Status:
Not open for further replies.

Share This Page