Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ruger Security Six cylinder removal

Discussion in 'Gunsmithing and Repairs' started by cutt1100, Nov 2, 2006.

Thread Status:
Not open for further replies.
  1. cutt1100

    cutt1100 Member

    Joined:
    Nov 2, 2006
    Messages:
    7
    I want to remove the cylinder from my Ruger Security Six to have it reamed. Is it just a matter of unscrewing the ejector rod from the cylinder? Is it right hand threads? Any help here will be deeply appreciated. Thanks
     
  2. Jamie B

    Jamie B Member

    Joined:
    Dec 25, 2002
    Messages:
    297
    Location:
    Southern Ohio
    Yes. It has been a while, but I believe that they are left hand threads.
    I cover the knurled end with a shop rag, and use channel locks to loosen it.
    There is a spring under the ejector star.

    Jamie
     
  3. cutt1100

    cutt1100 Member

    Joined:
    Nov 2, 2006
    Messages:
    7
    Jamie B

    Thanks for the info. It is a left hand thread. The pliers and the rag worked perfect.

    cutt1100
     
Thread Status:
Not open for further replies.

Share This Page