Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

S&W 908 owners, good BUG ?

Discussion in 'Handguns: Autoloaders' started by wditto, Nov 17, 2011.

Thread Status:
Not open for further replies.
  1. wditto

    wditto Member

    Joined:
    Dec 6, 2007
    Messages:
    513
    Location:
    DFW
    just wondering how many of us have used the 908 as a BUG, and how it works in pockets etc.
    I'm a big guy
    thanks
     
  2. AJChenMPH

    AJChenMPH Member

    Joined:
    Jul 30, 2009
    Messages:
    534
    Location:
    Bucks Co., PA
    I had the original version of the 908, the 3913. Unless you're close to 7' tall and 350 lbs, you'll be really hard-pressed to carry it in a pocket. For me, it's a belt-carry only pistol (I'm 6'0" and 175 lbs).
     
  3. 2wheels

    2wheels Member

    Joined:
    Mar 28, 2011
    Messages:
    1,094
    Location:
    Virginia
    Everybody is different, but I doubt most people could pocket carry a 908.
     
  4. wditto

    wditto Member

    Joined:
    Dec 6, 2007
    Messages:
    513
    Location:
    DFW
    hmmmmmmmm, it's smaller than the J-frame, isn't it? lotz of guys carry that in pocket....I'm only 6'1" at 250, but the J-frame seems little to me......
     
  5. The Lone Haranguer

    The Lone Haranguer Member

    Joined:
    Jul 30, 2006
    Messages:
    11,717
    Location:
    Johnson City, TN
    The pocket of a trench coat, maybe. ;)

    The 908/3913 series is a great belt gun, but no pocket gun. Although thinner and flatter, it is roughly 3/4 inch longer on each end than a Glock 19.
     
  6. bdb benzino

    bdb benzino Member

    Joined:
    Jun 26, 2009
    Messages:
    815
    Location:
    Willamette Valley, OR
    It's not even close to being as small as a j frame. More like a 4" or officer 1911 in size but lighter.
     
  7. usp9

    usp9 Member

    Joined:
    Dec 17, 2005
    Messages:
    3,645
    Location:
    Bowling Green, Va
    The 908 is pretty big for a pocket gun unless you happen to be a professional clown or wear a tool belt all day. I don't even see it in an ankle holster. As a bug, the 908 would not be the easiest gun to hide outside of a holster.
     
  8. AJChenMPH

    AJChenMPH Member

    Joined:
    Jul 30, 2009
    Messages:
    534
    Location:
    Bucks Co., PA
    You might be thinking of a different pistol...the only current S&W pistol I know of that's truly smaller than a J-frame is the .380 Bodyguard...although a CS9 might be close.

    I have a pic of my old 3913 somewhere, let me dig it up...

    ETA: here you go. The 908 is the "value line" model of the this, and blued:

    [​IMG]

    And to compare it size-wise with other pistols, here it is with (from top left to bottom middle) a SIG P226, a Taurus PT-739 TCP, a Glock 26, a Browning BDA-380 and a S&W 6906 (the 3913 is at the bottom right).

    [​IMG]
     
    Last edited: Nov 18, 2011
  9. wditto

    wditto Member

    Joined:
    Dec 6, 2007
    Messages:
    513
    Location:
    DFW
    nice photos, but without actually having the two in my hand, I'll have to depend on S&W's own measurements....
    they say the J-frame is 6.3 inches long, and the 908 is a whole 6.8 , wow, a whole one-half inch longer , yet a lot narrower, and it's all of a sudden a "big" gun - nope, all your sarcastic remarks aside, a half inch difference is not enough to discount my ability to carry - I have carried a lot bigger many times, but your references to my size or costume is not lost.
    as usual, I will refrain from expecting a normal or helpful discussion from the HighRoad
     
  10. The Lone Haranguer

    The Lone Haranguer Member

    Joined:
    Jul 30, 2006
    Messages:
    11,717
    Location:
    Johnson City, TN
    Have you actually looked at one? If not, find one at a gun shop or show and try it, hopefully side by side with a J-frame. The measurements on paper, at only one point, don't tell the whole story, I assure you.
     
  11. W.E.G.

    W.E.G. Member

    Joined:
    Sep 26, 2006
    Messages:
    7,362
    Location:
    all over Virginia
    Its a terrible choice for pocket carry.

    Pretty much any loaded gun is a terrible choice for pocket carry.

    Carry it right, or don't carry it.
     
  12. 19-3Ben

    19-3Ben Member

    Joined:
    Nov 5, 2006
    Messages:
    5,146
    Location:
    CT
    Every response I have seen in this post has been on point, and helpful.

    I'll chime in with the rest of the crowd. The 908/3913 are fantastic guns. Reliable, accurate, durable, etc... But they are not pocket guns.

    As the Lone Haranguer said, the on-paper specs do not tell the whole story at all. The size, weight, and shape of a gun all have to be taken into account. My Kahr K40 is smaller, on paper, than a J frame, but I would not carry the K40 in my pocket.

    I'll edit to add that one thing the on paper specs of a gun don't tell, is just how much of a gun is wide and how much is narrow. If you look at the on-paper width of a j-frame, it looks like it's wider than the 908. That's because it's measured across the cylinder. But the rest of the gun (frame, barrel, trigger guard, etc...) is actually much narrower than the 908. It's like when they measure a 1911 from the widest point at the safeties. The gun is narrow, but from reading the specs, you'd expect it to be very thick.
    Moral of the story- don't let numbers fool you. Go pick up the gun and handle it yourself. You might be surprised.
     
  13. 2wheels

    2wheels Member

    Joined:
    Mar 28, 2011
    Messages:
    1,094
    Location:
    Virginia
    Why? They invented these things called pocket holsters a while back. They work the same as any other kind of holster, cover the trigger, prevent NDs...
     
  14. PabloJ

    PabloJ Member

    Joined:
    Oct 17, 2010
    Messages:
    4,999
    I looked over something stamped 469. I liked double stack mag and very slim grip feature. It would take pocket of Filson Tin jacket to carry one loaded but for $300 it's almost impossible to go wrong. If I haven't picked up stainless Makarov recently it would have come home with me.
     
  15. Chindo18Z

    Chindo18Z Member

    Joined:
    Dec 24, 2002
    Messages:
    1,354
    Location:
    CO
    Lighten up.

    I'm amazed that you'd ask for peoples opinion and then get all butt-hurt when they don't agree with your pre-conceived idea. I don't see a single post that was anything but helpful. The photos provided by AJChenMPH were a nice touch for visual comparison.

    Why even bother to ask anyone about 908 pocket carry if you are just fishing for agreement with the fact that you've apparently chosen to do so?

    For my purposes, pocket carry means the weapon is completely concealed and rapidly accessible. I can temporarily carry a 5" Government model or N-Frame revolver stuck muzzle down in a back pocket, but that's not dedicated secure pocket carry. A snub .38 J-frame is about my max for a pocket carry revolver. A Ruger LCP is about my size limit for a pocket semi-auto.

    I find my 3913 (and my 39-2) to be too big for dedicated pants pocket carry (front or rear pocket). I would be willing to carry them in a large cargo pocket or winter jacket pocket. Otherwise...they get a holster.

    If you can pocket carry your 908...more power to you. It's a great gun.
     
  16. LawofThirds

    LawofThirds Member

    Joined:
    Apr 19, 2008
    Messages:
    474
    Yeah, my CS9 is pocket carryable in cargo pants or 5.11's covert khaki's, but just barely.

    But.... a j-frame conceals better somehow. It looks less gun than a semi-auto in a pocket, not sure how to describe it, but people who know me can spot the semi-auto but not the J-Frame.
     
  17. fastbolt

    fastbolt Member

    Joined:
    Dec 26, 2002
    Messages:
    2,585
    Location:
    Within the lightning
    My short J-frames will slip inside this case (so it can close), along with 5 sppedloaders, but my 3913 (and smaller CS9) won't.
    [​IMG]

    Here's one of my 642's along my 3913. The 642 will easily slip inside a pocket holster in many pants, jeans and jacket pockets where I can't get my 3913 (or smaller CS9) to fit.
    [​IMG]

    My CS9 is still taller and larger than my 642 (and similar J's), by just enough not to fit in many of my pockets. It's more the height of the grip frame than the rest of the pistol.
    [​IMG]
    [​IMG]
    [​IMG]

    I can, however, carry my CS9 more easily in some jacket pockets than my 3913. It's just enough smaller.

    Just depends.
     
    Last edited: Nov 18, 2011
  18. The Lone Haranguer

    The Lone Haranguer Member

    Joined:
    Jul 30, 2006
    Messages:
    11,717
    Location:
    Johnson City, TN
    Note the two guns side by side in fastbolt's photo. :) This is what I've been trying to get across. The revolver's rounded, smooth contours and small grip will slip into and out of even a fairly tight pocket easily. The pistol's protruding corners of the slide, grip tang and rear sight will be prone to snagging, as will the slide stop. The 908's slide is also more squared off and sharper than the rounded top slide of the 3913, exacerbating the problem. These things make the pistol an excellent shooter and belt gun, but work against it as a pocket gun.

    However you decide to carry that 908, you will be getting a fine pistol. Of the guns I had to sell during a rough patch in 2008-09, my 3913LS is the one I regret the most. :(
     
Thread Status:
Not open for further replies.

Share This Page