https://www.eabco.net/
They advertise they do . I've used their accuracy barrels in AR's and they are very good, sub moa.
Savage shooters have a forum
Your punch may fave not been the correct size. The ejector may be putting pressure on the pin. Setup in a vice to compress the ejector. The try driving the punch back out if you can.
Apply some Kroil penetrating oil set it set. Apply some heat to the part via a heat gun to expand the part. Cool the punch with ice if needed. On punches the face head needs to be flat, true, and very hard steel. The cheap punches are anything but.
See if you can grab the part (pin) sticking out with a drill chuck and pull it out. If not use a set of diagonal cutters to grip the pin. Protect the finish of the part and use the cutters as a lever to pull it out.
Get you a solid carbide drill and drill it out if you have some way of securing it solid. Or someone with a EDM machine, and let them burn it out.
How much does a mig welder cost?Drop a steel nut down over the pin and mig the pin to the nut then use that to pry on two sides and pull the pin out. Has worked well for me in the past. Cheap punches may be hard but they are also too brittle when they are that small.
My Craftsman punch worked very well for years until my coworker broke it.Drop a steel nut down over the pin and mig the pin to the nut then use that to pry on two sides and pull the pin out. Has worked well for me in the past. Cheap punches may be hard but they are also too brittle when they are that small.
200 and up. Sometimes 'way up.How much does a mig welder cost?
Last that I looked, a new bolthead was something in the vicinity of $25. I would probably put a new bolt head on the bolt body before I trusted that I didn’t grind through the bolt face itself.
When buying a replacement bolt head, you will need to know what face you want (223 class / 308 class / magnum), right or left hand action, and short or long action. From your picture, it looks like you need a 308 class (.480” rim diameter) bolt head for a right hand action, but I can’t tell whether you need a short action or long action – you will need to determine that from the chambering.
The bolt head will come stripped, which means you will need to also buy the ejector spring and ejector, along with the extractor spring, extractor detent ball, and extractor (if you cannot / do not want to reuse any of these items from the bad head).
Need some help with finding a source for a 303 Savage 99 barrel...
Thanks for the tip. First I'll check the gun parts places. Actually want the external profile for astetics and weapon balance. Turnbull may be an option if I can't find an old one laying around. Good starting point, thanks again.Duplicate as in factory original manufactured or just something with the same external profile? There are no new factory barrels available.Parts houses like Gun Parts Corp (aka Numrich), Jack First, or others might have used ones in various conditions. You will need to know the specific model series as certain specs changed over time. Some have V threads and some have square threads.
A matching profile can be turned from a blank by a good smith, but octagon to round is going to cost $$$$. Depending on your budget, you might call Turnbull and see if they can replicate you barrel from a new blank and add factory rollmarks.
. This may be the wrong venue for this topic but I have tried seventeen (17) times to register on savageshooter forum to ask a simple question. Can't get on it so I thought I would ask on this thread. Does anyone know if oregunsmithllc is still in business, and if so how to reach them? I'm still working my 303 savage issues and their old description in the magazines seem to indicate that they may have the answer to my problem.Thanks! Just added them to my desktop shortcut.