Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

screw in chokes for NEF Pardner pump 12 g

Discussion in 'Shotguns' started by William Lee, Sep 10, 2010.

Thread Status:
Not open for further replies.
  1. William Lee

    William Lee Member

    Joined:
    Jun 18, 2010
    Messages:
    107
    Location:
    Colorado
    Hey all,
    Anyone know what kind of chokes I can buy to supplement my mod cyl screw in that came with my NEF Pardner Pump 12 g? I'm specifically looking alternately for a rifled choke for sabot slugs. Does anyone have any experience with which brand will fit?
    As a secondary question, I'm also in the market for an 18" barrel for my pardner pump (currently has a 28 inch sport barrel) for home defense. I have heard the remington 870 barrels can be modified easily to fit the NEF, which is essentially a knockoff of the remington design. Does anyone have any experience with this? If so, please advise.

    Thanks.
     
  2. oneounceload

    oneounceload member

    Joined:
    Apr 24, 2008
    Messages:
    15,710
    Location:
    Hot and Humid FL
  3. William Lee

    William Lee Member

    Joined:
    Jun 18, 2010
    Messages:
    107
    Location:
    Colorado
    Thanks, Oneounceload. It's embarrassing to admit that I was not able to find this.
     
  4. oneounceload

    oneounceload member

    Joined:
    Apr 24, 2008
    Messages:
    15,710
    Location:
    Hot and Humid FL
    Not saying you can't find similar chokes from others...........Browning Invector type chokes are available from a wide variety of makers
     
  5. 35Rem

    35Rem Member

    Joined:
    Jul 19, 2007
    Messages:
    663
    Location:
    SE Alabama
    These questions come up all the time.

    The correct answer (and it's not a smart aleck answer, and definatelly not intended to be) is to read the owner's manual, or ask the manufacturer. If you have not read the manual, you really should.
    This information is most assuredly in the manual. If not, the manufacturer is the one to tell you how they made it.
     
  6. oneounceload

    oneounceload member

    Joined:
    Apr 24, 2008
    Messages:
    15,710
    Location:
    Hot and Humid FL
    If you don't have a manual, they can be downloaded........or you can do what I did and Google it................;)
     
  7. Hunterdad

    Hunterdad Member

    Joined:
    Dec 23, 2009
    Messages:
    1,873
    Location:
    Syracuse, NY
    They take Mossberg chokes
     
  8. Onmilo

    Onmilo Member

    Joined:
    Jul 26, 2004
    Messages:
    9,773
    Location:
    Illinois`
    Mossberg, Winchester, Browning Invector, and H&R are all interchangeable.
    Makes finding tubes for these guns really easy.
     
  9. William Lee

    William Lee Member

    Joined:
    Jun 18, 2010
    Messages:
    107
    Location:
    Colorado
    Thanks Onmilo. That's what I was wondering. The dudes at NEF were not super helpful. Yes, I did get a manual, but it only tells you how to take the barrel off the gun for cleaning the bore, and doesn't give much help other than that (what do you expect for a 135 dollar gun made in china?). In any event, it disassembles just like a Rem 870 so cleaning the action wasn't too tough. I just didn't want to blow 50+ dollars on a new choke tube only to find it didn't fit.
     
  10. 35Rem

    35Rem Member

    Joined:
    Jul 19, 2007
    Messages:
    663
    Location:
    SE Alabama
    http://www.hr1871.com/documents/manuals/new/Pardner-Pump.pdf

    Is this what the manual looks like? It says right there are page one:

     
Thread Status:
Not open for further replies.

Share This Page