Charlie98
Member
No
600 Jr is a good press.
You will not save any money by reloading.
+1
I used to shoot a fair amount of 12ga, and I had a MEC Sizemaster, which is essentially a 600 with the base resizer I believe. I sold mine some years ago because the cost of components... mainly lead shot... was so high as to not make it worth the trouble vs buying a case of cheapo field or trap ammos. I used the standard AA hulls because loading data and components for those is everywhere. Having said that, if you are loading something uncommon... buckshot or slugs... it might make sense, or it might not. Because shotshell data is very rigid, you may wind up having to buy hulls, or buy a case of factory ammo with the hulls you want to provide the seed corn for your reloading efforts.
As was mentioned... if you are loading something unusual... .410 bore or 28ga, etc... then reloading becomes more attractive, and if only because factory can be difficult (and expensive) to find.