sighting in

Status
Not open for further replies.

Monkybrainz

Member
Joined
Jan 21, 2009
Messages
37
Location
Washington state
Went out today to sight in some rifles with the fatherinlaw, well let me tell ya started out to look like a great day here in Wa state, but by the time we got two rifles diald in it got cold, We put tasco silver antlers on our .22's and went off to get em in tune, the first one was soo off it took dang neer 50 rounds to get'er right, the next one was easyer due to knowing how off the first was, at 50 yards the first shot was about 1 foot to the left, 18 inches down. and after several clicks and rounds we got it to stay within a 2 inch group at 75 yards in the center, all and all i like the scope. to bad it got too cold to sight in the .243
 
You really need a bore-sighter, If it's a bolt action, you can just pull the bolt and look thru the barrel to at least get on paper.
 
Status
Not open for further replies.
Back
Top