Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Stevens Model 520 Ejector

Discussion in 'Gunsmithing and Repairs' started by Brian66, Apr 10, 2013.

Thread Status:
Not open for further replies.
  1. Brian66

    Brian66 Member

    Joined:
    Apr 10, 2013
    Messages:
    3
    Location:
    Cullman Al
    I have a stevens 520 I am working on. It will not release the shell after extraction. A screw is missing and i am assuming it held a part on the inside of the receiver that pushes in on the extractor on the bolt opposite the ejection port to release the shell. Does anyone know what parts I am missing and where I can get them. Pictures would be great. Maybe even measurements in case I have to make one. Thanks for any help. My email is keith.jones_csa@yahoo.com
     
  2. BBBBill

    BBBBill Member

    Joined:
    Mar 7, 2005
    Messages:
    1,897
    Location:
    Alabama and Florida
  3. Brian66

    Brian66 Member

    Joined:
    Apr 10, 2013
    Messages:
    3
    Location:
    Cullman Al
    Thanks for the info. Do you know what is the part I am looking for is called in this diagram? I have never actually seen it all I have is a rectangular slot and a screw hole.
     
  4. Two Old Dogs

    Two Old Dogs Member

    Joined:
    Jan 20, 2009
    Messages:
    46
    Location:
    Eastern South Carolina
  5. Brian66

    Brian66 Member

    Joined:
    Apr 10, 2013
    Messages:
    3
    Location:
    Cullman Al
    Thanks Guys for the posts and the Emails, now that I know what the part looks like I should be able to find one.
     
  6. Kp321

    Kp321 Member

    Joined:
    Jul 12, 2012
    Messages:
    1,016
    Location:
    West Texas
    Those parts are getting hard to find, too many are lost. Use some Lock-Tite on the screw to prevent future loss.
     
Thread Status:
Not open for further replies.

Share This Page