DetroitRedneck
Member
- Joined
- Jun 15, 2013
- Messages
- 5
I'm new to reloading. Ran some 45 acp brass through the ultrasonic but they were still dirty so I dropped the brass in soapy water, let it sit overnight and shook the hell out of it. Then I let it air dry. To clean it better I sprayed brake clean and cleaned the inside with q-tips. Probably screwed up several times over.
A couple of the cases are a bit corroded and I'm concerned about using it. I used a very small pick and no holes were present.
What do you guys think? Thanks.
Here's the lot:
Here's the worst:
Here's the best:
A couple of the cases are a bit corroded and I'm concerned about using it. I used a very small pick and no holes were present.
What do you guys think? Thanks.
Here's the lot:
Here's the worst:
Here's the best: