Bought 2 EB thumb safeties recently. One for my Norinco and one for my ARMSCOR widebody.
The one I installed on the Norc fit really nicely. The one on my ARMSCOR would not completely go into the "off" position to engage the plunger. At first I thought the inner side of the paddle was hitting the plunger tube so I trimmed that part of the safety to clear the plunger tube. Still the dimple on the safety is a hair short of going way down to allow the plunger to rest in the recess. As a result the safety is easily knocked up into the "on" position. The safety seems to function well blocking the sear from moving though. I'm usimg Wilson Sear, EE disconnect and Koenig hammer. I tried the original Norc safety on the ARMSCOR, all's well. Tried the original ARMSCOR on the Norc, works ok too. I swapped EB safeties between the 2 guns, both safeties work OK with the Norc and both have the same problem with the ARMSCOR. What gives? TIA... batoy
The one I installed on the Norc fit really nicely. The one on my ARMSCOR would not completely go into the "off" position to engage the plunger. At first I thought the inner side of the paddle was hitting the plunger tube so I trimmed that part of the safety to clear the plunger tube. Still the dimple on the safety is a hair short of going way down to allow the plunger to rest in the recess. As a result the safety is easily knocked up into the "on" position. The safety seems to function well blocking the sear from moving though. I'm usimg Wilson Sear, EE disconnect and Koenig hammer. I tried the original Norc safety on the ARMSCOR, all's well. Tried the original ARMSCOR on the Norc, works ok too. I swapped EB safeties between the 2 guns, both safeties work OK with the Norc and both have the same problem with the ARMSCOR. What gives? TIA... batoy