Has anyone with an accurate scale verified the weight of Titegroup in the cavity range of the .34 thru .53.. My scale measures .3 grains less than the chart that comes with the autodisk.. My scale has a +/- .2 grain variation depending on temperature when measuring in the 4 to 6 grain range.. I'm looking for actual numbers you measured..
Titegroup weights in Lee autodisk
- Thread starter dudlee
- Start date
- Status
CatsEye
Member
The Lee chart is an approximation at best. Here are a couple I have loaded.
Disk - Charge
.34 - 3.70
.37 - 4.00
Disk - Charge
.34 - 3.70
.37 - 4.00
evan price
Member
I have six different autodisk measures and ten sets of discs. All of them weigh slightly different from each other, usually less than .1 grain apart. The weights I list here are with MY discs in MY measure in MY home and you should measure YOUR discs' throw to ensure they are what YOU want to see.
TITEGROUP in Autodisc
"A" NOM ACT
.30 3.5 3.5 <== My .38 Special 158-gr LSWC load
.32 3.8 3.7
.34 4.0 3.9
.37 4.4 4.2 <== My 9mm 124-gr LRN load
.40 4.7 4.6 <== My 45 acp 230-gr LRN load
.43 5.1 5.0 <== My 357 Mag 158-gr LSWC load
"B"
.46 5.4 5.2
.49 5.8 5.6
.53 6.3 6.0
.57 6.7 6.5
.61 7.2 7.0
.66 7.8 7.7
TITEGROUP in Autodisc
"A" NOM ACT
.30 3.5 3.5 <== My .38 Special 158-gr LSWC load
.32 3.8 3.7
.34 4.0 3.9
.37 4.4 4.2 <== My 9mm 124-gr LRN load
.40 4.7 4.6 <== My 45 acp 230-gr LRN load
.43 5.1 5.0 <== My 357 Mag 158-gr LSWC load
"B"
.46 5.4 5.2
.49 5.8 5.6
.53 6.3 6.0
.57 6.7 6.5
.61 7.2 7.0
.66 7.8 7.7
Hondo 60
Member
I've used the discs with 5 or 6 different powders & none of them are correct when compared to Lee's chart.
You need to weight the powder to make sure you're getting an accurate charge.
You need to weight the powder to make sure you're getting an accurate charge.
- Status
