I have a turkish semi auto shotgun, i swapped this gun for a warn out trap gun i had gathering dust. I knew it had issues but being used to repairing guns as a hobby business i gave the fact it was not functioning not one thought a quick wash and brush up and all would be well.
This did not happen with this gun at all, everything appear to be working as it should with some minor scuffs and burs on a few parts of the trigger assembly but nothing warn to excess snapped or missing.
I would appreciate some help here i really would, i picked the gun up as a duck goose killer for my young daughter just 12, it is light and takes rem chokes so i have decent choke tubes for it with zero expense, that is if i can get it working.
Right just what is wrong it is not picking up a shell when drooped in the actions ejection port and the button pressed it lets the bolt fly forwards but the ramp flicks up and jams the case against the top of the reciever long before it gets anywhere near the chamber. You can feed the first round in the chamber throw the bolt forwards the bolt shuts fine feed a couple of shells in the mag, shoot the gun it fires and ejects fine but will let nothing out of the mag and the bolt does not lock back.
Now i can photo the gun stripped and every component if need be i am at a loss with this at the moment and need some help, thus why i am asking on here. Can any offer any advice please i would be grateful if you could help me repair this gun, before September. Here hopefull.. COTA!
This did not happen with this gun at all, everything appear to be working as it should with some minor scuffs and burs on a few parts of the trigger assembly but nothing warn to excess snapped or missing.
I would appreciate some help here i really would, i picked the gun up as a duck goose killer for my young daughter just 12, it is light and takes rem chokes so i have decent choke tubes for it with zero expense, that is if i can get it working.
Right just what is wrong it is not picking up a shell when drooped in the actions ejection port and the button pressed it lets the bolt fly forwards but the ramp flicks up and jams the case against the top of the reciever long before it gets anywhere near the chamber. You can feed the first round in the chamber throw the bolt forwards the bolt shuts fine feed a couple of shells in the mag, shoot the gun it fires and ejects fine but will let nothing out of the mag and the bolt does not lock back.
Now i can photo the gun stripped and every component if need be i am at a loss with this at the moment and need some help, thus why i am asking on here. Can any offer any advice please i would be grateful if you could help me repair this gun, before September. Here hopefull.. COTA!