LynnMassGuy
Member
2 different loads that shoot very accuratlely and feel normal if not a little light are leaving un-burned powder in the brass, in the cylinder, and on the bench in front of me. The first load is 3.3 grains of Herco in .38 special with a 148 grain wadcutter. The other load that is doing it is 4.6 grains if Green Dot in .357 Magnum with a 148 grain wadcutter. They are both being fired from a 4"bbl .357 magnum Security Six. Both loads feel very mild and shoot very well but are making somewhat of a mess. Is this normal.