MtnCreek,
Filled my Doe tag last night, hung her in the barn and went back out this morning to take her to the locker. Did some subtense while I was out there.
Targets were 2/3rds IDPA silhouettes at 200Y and 300Y (Approx) and an 8” circle plate at 200. The IDPA silhouettes measure 19.5”H and 11.7” W.
At 200 the 8” circle was just shy of 4 MOA or 2 graduations on the Viper HS, just about where it should be. The Silhouette was just shy of 10MOA or 5 graduations high, and just shy of 3 graduations wide.
At 300, the silhouette was about 6MOA or 3 graduations high and about 4MOA or 2 graduations wide.
Please keep in mind, this is my private range so the ranges are approximate based on my bench location and my berms. I’ve used Google Earth and a GPS to range everything, so they are close, but not exact. From what I can see the graduations at 4X seem to be about spot on.
Chuck