Weihrauch HW77 Question

w296

Member
Joined
Dec 27, 2002
Messages
61
Location
Callahan, Florida
I have owned this air rifle since the mid 80's. It's been a safe queen for a number of years now. I recently took it out to do a little target work. Years ago I had no problem loading the pellets. I no longer have the dexterity to load them. There is limited room to load due to the scope above it. One solution would be to change to higher scope mounts which I really opposed to. I have tried forceps and that did not go well. Curious if anyone makes a tool/device that would ease the loading process. 1708225747768.png
 
This was passed on to me by some of the old timers at Oil Capital Air gun Wednesday night shoots. Go to hobby lobby. look for the dowel rod section that modelers and RC plane makers use. find the dowel diameter that fit the waist of match pellets. chop off two 8 to 10 inch sections. At one end tape the two together tight. then about an inch 1/2 from the other end a easy stretching rubber band wound around a few times. open the ends and stick a wasp waisted match pellets in. insert pellet head into the breech / chamber. gently slide the pellet from between the dowels. (If done correctly the pellet head should stay in breech. press home with finger or angled seater.
 
Back
Top