I use H-4350 in the .30-06. My load for my current .30-06 59.5gr of H-4350 with the Sierra 165 SBT and CCI BR2 primers. Velocity is 2830 fps. Five shot group at 100 yards measures .247". I have had quite a few .30-06 over the years and I've never failed to get fine accuracy from them.
I use Hornady 150 Gr. SST's in my Rem 700. Best load I've found is 51.0 grains of IMR 4064 with Fed 210 primers. Super accurate and gives about 2875 fps at the muzzle (24" bbl). Also had good success with Varget and 150 grainers in that gun. Good luck!
IMR 4350 in my 24 Inch Winchester Mod.70 The load I use is from an old Lyman book and is no longer shown. This was a load shown as one of their "accuracy" loads.
TGR
I use that old 4350 accuracy load in my REM Model 760-- 30-06 also. it is 52 grains of IMR4350 with a 165 gr bullet!(lyman 45th edition) anyone know why it is no longer listed in the latest Lyman manual as an accuracy load??
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.