What load do you load the most?

[euclid]

Mostly .40

followed by 10mm

then .45.

If factory 9mm weren't so darn cheap, it would probably displace the 10mm in the number two slot.

poof...

 

[FAL_Freak]

45 ACP either 200 gr SWC Laser-casts or 230 Hornady XTP's with 5 grains of Titegroup or IMR PB (I prefer Titegroup, more consistant mettering).

 

[mohican]

I definately load .44 mag the most

I have been loading for .454 al lot lately, also

I can tell what I load a lot of by the setup

If it's set up in the quick change die holders for my RL550B then I reload frequently for it.

 

[Pointman]

45 ACP 5.4gr Bullseye 200gr LSWC WLP

 

[CTI1USNRET]

45 ACP - 230 gr LRN (Precision black bullets) on top of 6.0 gr Unique and CCI # 300 Large Pistol Primers. Range brass. I think one of the local PDs has switched to 45 ACP. I haven't had to buy brass in a long time.

 

[Fed168]

Just finished a lot of 4000 9mm. I load a 121 grain HAP over 3.8 grains of Titegroup, mixed brass, Federal small pistol primers.

Followed by 10mm, .38/.357, and .45.

 

[Kcustom45]

45ACP 230 FMJ over 5.8gr Universal. Followed by 40S&W and 44mag.

 

[Mr. Chitlin]

I compete with a Glock 35, so 40 S&W gets my #1 spot by a long shot. I shoot a 165 gr Montana Gold FMJ over 6.5 grains of Unique. Then, probably #2 is 9mm 124 gr FMJ, then 45 ACP 230 gr FMJ.

 

[lycanthrope]

1. .45 ACP, 200g LSWC over 4.3 gr of Clays

2. 7mm STW, 140gr CT Ballistic Tips over a hearty portion of IMR 7828

 

[happy old sailor]

.41 mag with enough blue dot to fill the case if i double charge. haven't done that, but is a possibility however remote.

Laser-Cast and UPS have better annual financial reports because of me.
i load other calibers, but, .41 gets the bulk of my reloading funds.

 

[Zeke Menuar]

38 Special is comfortably in first place

140gr cast bullet
6.0gr Power Pistol

Lost track of how many rounds I have gone through

45 ACP is in second place. Since I stopped shooting IPSC I don't load 45 near as much.

225 gr cast FN
6.9gr Power Pistol


ZM