Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Just increase temps on the pot until your alloy melts. As long as you aren’t getting hundreds of degrees above this point you will be fine. It really is that easy.
Hmm, at Amazon CANADA, that PID costs almost as much as the Lyman digital Lead thermometer, and one the reviewers tested the PID and said it overshoots a LOT. Looks like the Lyman solution might be the most practical solution, given it is designed for specifically this application and costs almost nothing more than the PID.
Just increase temps on the pot until your alloy melts. As long as you aren’t getting hundreds of degrees above this point you will be fine. It really is that easy.
I hear you, but for the alloying (versus casting), I will be using a s.s. pot sitting upon a 1500 watt hot plate! Wuth 1500 watts available, it would be easy to get to a higher than I want temperature! (For comparison, my Lyman Mag 25 furnace for CASTING only uses 700 watts maximum). I magine 1500 watts could elevate the alloy temperature VERY quickly.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.