barnwood
Member
I am hoping that someone will be able to explain how to get the firing pin out of the breech bolt sleeve. Currently, I have the spring and washers off of the firing pin. My disassembly book shows a bolt with a cap on the end and a pin. I believe mine must be a newer model as it does not have this cap. There was a small set screw which I have removed. The safety is in the fire position and will not rotate to any other. There is some rust between the sleeve and firing pin and could be what is keeping it from moving. It has been soaking in Kroil for about 4 weeks and I tap with a rubber mallet every few days. No movement as of yet. In reference to rust, I can see what may be rust around the edge where the firing pin and bolt sleeve meet. There is excellent bluing on all other visible surfaces. What should be my next move?
:banghead:
Thanks, Larry
:banghead:
Thanks, Larry