Xtreme 9mm 115 gr RN question

[pcallahan1984]

I picked up some Xtreme 9mm 115 gr RN bullets today. Going to use them in my M&P Shield. Does anyone have any load data that would be a good starting point for theses bullets in a M&P shield? I have access to 700x, TiteGroup, and Bullseye. The OAL data is most important to me. Thank in advance.

 

[Walkalong]

Load them to fall between 1.130 to 1.135 OAL.

 

[pcallahan1984]

Thanks Walkalong... Would you say the Xtreme 9mm 115's profile is closest to Speer data?

 

[Walkalong]

I don't know, I have just had good luck with that OAL with various 115 and 124/4 Gr 9MM bullets.

 

[kcofohio]

I don't know about profile. But when I worked up some 115 gr. Berry's, I used Hodgdon's lead bullet data. Just not the same COAL. Walkalong's length is at a good start. I think mine were at 1.140" or 1.150". With Hodgdon lead load data, as you work up your load, you may go a hair over max.

 

[nastynatesfish]

Just load them to whatever fmj oal you have. They say to load them to mid lead data. I load 147gr extreme 5 gr n350

 

[Duvel]

I've loaded Xtreme's 115 to 1.120 with no issues in a TP9, XDM, Sig, etc.

 

[1KPerDay]

OAL is individual to the pistol. Plunk and feeding tests are essential before you load a bunch.