Your Gun Cleaning Routines

This is a Remington 700 30-06 that I bought new in 1975. Between 1975 and 1980 it did go deer hunting a few times.
In 1980 and until 2014 it deer hunted at least 2 days per week during deer hunting season. Rain, shine, snow, sleet, heat and cold. It did its job without fail. In 2014 I got too old and out of shape to continue. But, It did not. It's still ready to go another life time of deer hunting.
Before the days hunt. A bolt action rifle is not what most people would consider a rapid fire weapon. On a normal deer hunting day, maybe cycle the action 6-8 times. Probably more like 4. Maybe?
It would get sprayed and wiped down with wd40 to protect it from all the wet. No oil needed. The wd40 was plenty enough lubricant to protect the bolt the 6-8 cycles of the day. That night the 700 was wiped down, sprayed and wiped down again with wd40. The next day. Rain, shine, sleet or snow it was ready to go.
1980 - 2014 To this day No part ever replaced. No part ever failed. NO Rust. At least two times a year it's removed from the safe and treated with the wd40 as we remember old times.
Some day it will pass to my grandson "Along with a couple cans of wd40" Ready for another lifetime of deer hunting.
But, If you want to bump bolt heads to try and prove wd40 is not for guns. We can. 20200204_113158~4.jpg
 
I have had a few mechanics tell me that they do not use WD 40 much since it contains some water. So, I stay away from it.
From Live Science.com
(WD-40 does not contain fish oil, contrary to a popular myth, nor does it contain silicone, kerosene, water, wax, graphite, chlorofluorocarbons (CFCs).
 
About every 100 Rds’ Interval,

Internally cleaned near music channels from Direct TV.

The aroma of Ballistol.

Motivation?
: I Don’t want any of my guns to resemble the Filthy guns seen on Gun Show Tables exhibited by some shady people, or some with too many guns and little time to clean.
 
Last edited:
When I was (much) younger, I think I even looked forward to field-stripping and cleaning my guns. Of course, I also liked washing and waxing my car in them days. Not so much now. The only thing I like cleaning anymore is my plate.
 
I have three rifles that are a real chore to clean. The 30 Carbine, My TROY PAR (pump action rifle-.223 &5.56)). and me Kel-Tec SU-!6-CA (.223 & 5.56). I do clean them after shooting but it usually takes me around an hour each. First I run a wet patch down the bore and let set around 15 min's, then a wet brush, then another wet patch, then dry patches until the patches are clean, then one drop oil on dry patch. Then I scrub and clean all the other components and use the same oil patch, a little oil goes a long way.
 
Most firearms can be cleaned fairly well without field-stripping them. Cleaning the bore and getting solvent into every nook and cranny that can be reached with brushes and pipe stem cleaners and then applying lubrication via those same accessible areas can go a long way between more thorough cleanings.
 
If you have a Ruger Mark IV handgun, this was a redesign from early Ruger Mark handguns, for much easier dis- and reassembly.

There's zero excuse for no cleaning in these, or in any other guns, unless one's life is in constant crisis, or your "handlers" no longer want you near your 'shotgun', or a microphone...o_O
 
Back
Top