LiveLife
Member
GENERAL DISCLAIMER: This "unscientific" prototype project is being conducted by a "random guy on the internet"; therefore, use posted loads (based on published and unpublished load data) at your own risk. As always, since there are many reloading/shooting variables, your results from using different components, equipment and firearms may vary. Information posted on this thread is for educational/entertainment purposes only.
SAFETY DISCLAIMER: Always reference published load data for your load development.
ACCURACY/CONSISTENCY DISCLAIMER: This "unscientific" portable testing project obviously lacks ideal laboratory testing conditions. Accuracy and consistency claims expressed or demonstrated are likely by chance and may not be consistently repeatable or reproducible.
IMPARTIALITY DISCLAIMER: The "random guy on the internet" is in no way compensated by manufacturers/vendors of products tested which will include various headstamp brass, various brand projectiles, various powders, various primers, various firearms/barrels and various reloading equipment. Use of particular product or equipment in no way express endorsement. Any positive/negative comments expressed towards any product or equipment by the "random guy on the internet" is strictly personal opinion only.
A SPECIAL REQUEST FROM THE ORIGINAL POSTER (OP): Attempts will be made so in case the prototype project produces portable testing platform that successfully produces MORE CONSISTENT groups (not the best groups), focus will be made so cheaper/easier reproductions can be made and tested using readily available plywood and metal stock from THR members' local lumber/hardware stores. My ultimate goal for this project is to make available more consistent portable testing platform to other THR members so pursuit of "optimal" portable testing platform WILL NOT be made by intent. Please refrain from posting information deviating from this intent. Thank you in advance.
With those disclaimers out of the way, here we go with the prototype project.
NOTE: I will number my posts with descriptions for better tracking/referencing.
SAFETY DISCLAIMER: Always reference published load data for your load development.
ACCURACY/CONSISTENCY DISCLAIMER: This "unscientific" portable testing project obviously lacks ideal laboratory testing conditions. Accuracy and consistency claims expressed or demonstrated are likely by chance and may not be consistently repeatable or reproducible.
IMPARTIALITY DISCLAIMER: The "random guy on the internet" is in no way compensated by manufacturers/vendors of products tested which will include various headstamp brass, various brand projectiles, various powders, various primers, various firearms/barrels and various reloading equipment. Use of particular product or equipment in no way express endorsement. Any positive/negative comments expressed towards any product or equipment by the "random guy on the internet" is strictly personal opinion only.
A SPECIAL REQUEST FROM THE ORIGINAL POSTER (OP): Attempts will be made so in case the prototype project produces portable testing platform that successfully produces MORE CONSISTENT groups (not the best groups), focus will be made so cheaper/easier reproductions can be made and tested using readily available plywood and metal stock from THR members' local lumber/hardware stores. My ultimate goal for this project is to make available more consistent portable testing platform to other THR members so pursuit of "optimal" portable testing platform WILL NOT be made by intent. Please refrain from posting information deviating from this intent. Thank you in advance.
With those disclaimers out of the way, here we go with the prototype project.
NOTE: I will number my posts with descriptions for better tracking/referencing.
Last edited: