peeplwtchr
Member
- Joined
- Sep 20, 2019
- Messages
- 1,608
Hi All-
So I am precision loading for a ladder test. I use both a beam and a digital, which in the past has been VERY consistent and accurate. When I compared my digital readings from yesterday to the beam, everything I weighed on the digital reads lower on the beam.
I assume something was interfereing with the digital? I researched what might cause this, but saw nothing of what my suspicions might be. Do you see any possible causes in my environment?
1. I am 3 feet from an electrical outlet
2. Within 10 feet, there is a tv, amazon fire stick, cell phone
3. Ambient temp is 78 degrees
4. The scale and table are stable
5. Both scales zeroed and calibrated
6. Powder is CFE-223
Thanks!
So I am precision loading for a ladder test. I use both a beam and a digital, which in the past has been VERY consistent and accurate. When I compared my digital readings from yesterday to the beam, everything I weighed on the digital reads lower on the beam.
I assume something was interfereing with the digital? I researched what might cause this, but saw nothing of what my suspicions might be. Do you see any possible causes in my environment?
1. I am 3 feet from an electrical outlet
2. Within 10 feet, there is a tv, amazon fire stick, cell phone
3. Ambient temp is 78 degrees
4. The scale and table are stable
5. Both scales zeroed and calibrated
6. Powder is CFE-223
Thanks!