Has it misfired yet?
In Februrary, 2021 I purchased a new Undercoverette, steel frame 6-shot model. Right out of the box, the cylinder was misaligned and it spit bullet jacket into my face. A range rod would not pass down the bore through the chambers. The yoke looked like it was fitted with a hammer and a rough file.
It was promptly returned to Charter Arms on their dime. A month later it came back repaired. The ejector rod was now so tight it the head could not be removed without tools. Immediately started misfiring - light hits in both DA and SA. Went back again to Charter on their dime.
Over a month later it was returned "repaired". Started misfiring again within 50 rounds. I thought it was a primer problem so tried different ammo. It all misfired 20-50% of the time. Went back to Charter AGAIN (3x). This time the gunsmith called me and said they haven't been making many steel frame guns and this one might have to be replaced with a aluminum frame version. A few months go by and in February, 2022 I received a replacement Undercoverette, 6-shot aluminum frame. This was a year after buying the original and being continually frustrated.
The replacement was nicely finished, no sharp edges. However, within the first 25 rounds, the trigger stopped returning. It appeared to be catching on the cylinder stop leg and the trigger spring couldn't overcome it. ANOTHER RETURN to Charter.
A month later it comes back. Very nice trigger pull. Within 50 rounds, it starts misfiring in double action. Two to three rounds in every cylinder - obvious light hits, usually firing on the second attempt. I'm starting to think it's me. I try yet other ammo. Same results. I put the same ammo - three different types - into my S&W 432 and 31-1 and it all fires 100%. Ammo out of the same box that misfired in the Undercoverette.
I'm done. I've wasted over 500 rounds of expensive .32 S&W Long and .32 H&R Mag ammo in Undercoverettes that don't work. This is Taurus-level quality. Something did not make the transition from 5-shot to 6-shot. Calling Charter tomorrow and want either a refund or a different model.
BTW... not a Charter-hater as I own SEVEN other Charter Arms revolvers - Bulldog Classic, 41 Mag Pug, Professional, Undercover High Polish, etc - and NONE of them had problems like these. I've given them way more chances than is reasonable to get this one right. Yes the customer service is friendly. But it has to be, you will be using it often.