Evergreen
Member
I just purchased a brand new Ruger Redhawk 44Mag with a 4in barrel. I'm going on a trip to Glacier NP and decided to ditch my old S&W 629-4 4in, because I want the gun primarily to be used for bear defense and the 629 just cannot handle the heavy loads like the Ruger. After purchasing the Ruger and seeing its solid construction I really feel much happier with it than the Smith. Needless to say, even though I love the Smith, I cannot afford to keep it and will be getting rid of it..
I also own a S&W 460v which supposedly can handle the heaviest of the heaviest, yet the Buffalo Bore ammo screws up the gun and I have extraction issues, as well as cylinder locking issues. I had to force open my cylinder once as it got stuck after the last round. Only through constant hammer cocking and pulling the trigger could I finally get it to budge. I'm told there are many reasons why the Buffalo Bore 460 doesn't work in a .460. Everything from being too hot, to have improper dimensions on the casings or bullets, etc. I don't know why, but Buffalo Bore is out for my 460.
Now, I am told that the Ruger Redhawk can handle the heavy loads. So, I see Buffalo Bore makes a very nice 44 mag round that almost seems on par with a .454 Casull round. Since, I am going into Grizzly Bear country in Montana, I would like to have the best load I can handle. Also, I would like to do a little plinking and practicing with the round I load for my hikes. Basically, I would like to shoot a box or so. Would, using the Buffalo Bore 340gr +P+ hurt my Ruger Redhawk or can it take a good number of these rounds without any risk of abuse? I know my Smith could not even handle the 320gr hardcast COrbon loads. S&W told me themself on the phone not to shoot more than 3 or 4 rounds ever for the life of this gun for practice. I am told the Redhawk can take a steady supply of these without any issues. I guess, I know the Buffalo Bore is pushing the 44 mag to the limits and want to make sure there won't be any repercussions with this round. I do want to get a feel for it if I will be carrying it with me.
I'd appreciate to hear people's opinions. Do most people think I should stay with the Corbon Hunter 320gr Hardcast round or would it be to my advantage to use the 340gr +P+ Buffalo Bores, considering the Ruger Redhawk, is supposedly built like a tank .
My thoughts are accuracy won't be an issue, as if I am being charged by a Black Bear or Brown Bear I would only get one or two shots and would wait until it got close. For the most part I will rely on pepper spray for protection, but if I am in that unfortunate situation where all I can reach for is my gun, I'd like the best round I can get for that situation. I feel the more knockdown power the better.
I'm assuming I can handle the recoil of this round, because the Redhawk is a thick frame and I can handle the recoil of the .460 rounds out of my 5in S&W 460v. I'm assuming it would be somewhat comparable to that, although my 460v does have a compensator.
I also own a S&W 460v which supposedly can handle the heaviest of the heaviest, yet the Buffalo Bore ammo screws up the gun and I have extraction issues, as well as cylinder locking issues. I had to force open my cylinder once as it got stuck after the last round. Only through constant hammer cocking and pulling the trigger could I finally get it to budge. I'm told there are many reasons why the Buffalo Bore 460 doesn't work in a .460. Everything from being too hot, to have improper dimensions on the casings or bullets, etc. I don't know why, but Buffalo Bore is out for my 460.
Now, I am told that the Ruger Redhawk can handle the heavy loads. So, I see Buffalo Bore makes a very nice 44 mag round that almost seems on par with a .454 Casull round. Since, I am going into Grizzly Bear country in Montana, I would like to have the best load I can handle. Also, I would like to do a little plinking and practicing with the round I load for my hikes. Basically, I would like to shoot a box or so. Would, using the Buffalo Bore 340gr +P+ hurt my Ruger Redhawk or can it take a good number of these rounds without any risk of abuse? I know my Smith could not even handle the 320gr hardcast COrbon loads. S&W told me themself on the phone not to shoot more than 3 or 4 rounds ever for the life of this gun for practice. I am told the Redhawk can take a steady supply of these without any issues. I guess, I know the Buffalo Bore is pushing the 44 mag to the limits and want to make sure there won't be any repercussions with this round. I do want to get a feel for it if I will be carrying it with me.
I'd appreciate to hear people's opinions. Do most people think I should stay with the Corbon Hunter 320gr Hardcast round or would it be to my advantage to use the 340gr +P+ Buffalo Bores, considering the Ruger Redhawk, is supposedly built like a tank .
My thoughts are accuracy won't be an issue, as if I am being charged by a Black Bear or Brown Bear I would only get one or two shots and would wait until it got close. For the most part I will rely on pepper spray for protection, but if I am in that unfortunate situation where all I can reach for is my gun, I'd like the best round I can get for that situation. I feel the more knockdown power the better.
I'm assuming I can handle the recoil of this round, because the Redhawk is a thick frame and I can handle the recoil of the .460 rounds out of my 5in S&W 460v. I'm assuming it would be somewhat comparable to that, although my 460v does have a compensator.