Recent content by RBANNON

Hello all, I found a couple of tools in a catch all box I purchased at an auction. They appear to be factory made. The tools were mixed in with some other gunsmithing items. My gut says they could be some sort of shotgun tool. One tool has: O.F.M. P/N F-3647 and the other has...

Frank, Thanks for the information!

Here are some more pics of the TL-15 safe. One thing I noticed about the door. It was very smooth in operation but the inertia of 700 lbs of door gets your attention. One certainly would not want to have a finger in the wrong spot.

I am looking at a used safe that I cannot find a brand or manufacturer on the safe. There is a BP-1000 badge with a UL TL-15 reference on it and a UL BP-280 badge with relocking device reference. The construction is 1" plate for the body and 1-1/2" plate for the door. I can't tell if it is...

You might try to put a piece or two of monofilament fishing line in the fastener to create a poor man's Nylock.

A relative of mine recently purchased a used safe with a S and G lock and no combination. The door was off the safe and the back was accessible. We removed the rear cover on the lock and after a little work, we came up with a combination that seems to work fine. If It was an option I would...

I just received one of ofitg's adapters and was very impressed. His solution to this problem is elegant and practical. It was easy to install and I like the fact that with this adapter, the user can service the lamp themselves. Now I am kicking myself for passing on an old OEG at the last...

Can anyone post a photo of the OEG's tritium lamp or vial?

Thank you for the responses! I really appreciate the help.

I am wanting to replace the Sargent and Greenleaf lock on gunsafe and I do not know how the dial attaches to the lock through the safe door. Is this something that can be done at home or is strictly for professionals? Thanks,

Atomic weight is not the same as specific gravity. Tungsten's specific gravity is around 19.6, lead's is around 11.34, bismuth is around 9.75, and steel is around 7.85.

I think they were threaded 9/16" x 24 tpi.

One thing you might want to check is the chamber length. I had a Remington 11 that had a 2-5/8" chamber.

Ranch Products makes/made a scout rail that replaced the top part of the gas block. From what I recall, they were made of steel. They seemed a little crude in aesthetics, but strong. Midway lists them.

I do not own one of these, but it looks like a good product. http://www.shootingbenches.com